Xislet 3PCS 16.5" Radar Detector Hardwire Power Cord Mirror Wire Plug Tap
- Radar Detector
- Better rated than 94%
- More reviewed than 65%
Buy this if your detector power jack is RJ11 and you want a hardwired mirror connection with fuse protection built in. It will not fit Redline 360c or MAX-series detectors.
As an Amazon Associate, ProductDome may earn a commission from qualifying purchases made through links on this page.
Sizes Available
Need a different one? Pick on Amazon →
How it ranks among the 17 radar detectors we track
4.7★ across 1,600 Amazon ratings, Bayesian-smoothed toward the category average.
1,600 Amazon ratings, weighted on a log scale so huge counts don't drown everything.
500+ bought on Amazon last month.
Brand identity, imagery, description and spec coverage.
The ProductDome score is separate from the Amazon rating shown above: it combines the Bayesian-smoothed Amazon rating with evidence volume, tracked demand, and data quality across the 17 radar detectors we track - how the scorecard works · full radar detectors data report. Confidence: limited - incomplete product information.Updated 8 days ago. Data-computed, not a hands-on test. Compiled by the ProductDome Research Team.
Overview
A 3-piece RJ11 hardwire cord for mounting a radar detector power line behind the rearview mirror, with three pin sizes to match different mirror plugs and a built-in 2 amp fuse. Suits owners of Escort, Valentine 1, Uniden R-series and Cobra units with an RJ11 power jack.
The set solves a specific installation problem: matching the pin count on your mirror's power tap to your detector's RJ11 plug. It skips the dashboard clutter of a 12V cigarette cord in favor of a hardwired mirror connection, with zip ties included for routing the extra length along the headliner. It will not work with Escort's Redline 360c or any MAX-series model, since those use a different power interface entirely.
- 3 pin sizes in one pack
- Built-in 2 amp fuse
- 16.5 inch cord with zip ties
- Fits Escort, Valentine 1, Uniden R-series, Cobra
Who it's for
Drivers hardwiring an RJ11-equipped radar detector, such as an Escort, Valentine 1, Uniden R-series or Cobra unit, who want a cleaner mirror-tap install instead of a dangling 12V cord. Not for owners of Redline 360c or MAX 2/3/360/360c models, or detectors that charge over Mini USB or 3.5mm DC.
Strengths and trade-offs
Drawn from this product's published specifications.
- Three pin sizes cover different mirror plugs
- Built-in 2 amp fuse for circuit protection
- 16.5 inch length with zip ties for routing
- Comes with an install diagram
- RJ11 jack only, no Mini USB or 3.5mm DC
- Excludes Redline 360c and MAX-series detectors
- You must pick the right pin size yourself
Performance notes
Each cord carries a hand-soldered 2 amp fuse inline for circuit protection, and the pack ships with three pin sizes so you can match whichever mirror plug your vehicle uses. At 16.5 inches, there is enough slack to route the cord up behind the headliner, and the included zip ties keep the run tidy rather than hanging loose.
Specifications
| Brand | Xislet |
|---|
How it compares
This product against the closest alternatives we track in radar detectors.
| Product | Amazon rating | Ratings | ProductDome score |
|---|---|---|---|
| Xislet 3PCS 16.5" Radar Detector Hardwire Power Cord Mirror Wire Plug TapThis product | 4.7 / 5 | 1,600 | 2.7 / 5 |
| Uniden R3 EXTREME LONG RANGE Laser/Radar DetectorUniden | 4.6 / 5 | 7,900 | 4.6 / 5 |
| Escort Redline 360c Plug and Play Radar DetectorEscort | 4.6 / 5 | 384 | 4.3 / 5 |
| Cobra RAD 480i Laser Radar DetectorCobra | 4.2 / 5 | 10,800 | 4.3 / 5 |
| SDSACZMU Radar Detector MountSdsaczmu | 4.5 / 5 | 524 | 4.1 / 5 |
Similar radar detectors from other brands
Questions about the Xislet radar detectors
Common buyer questions answered straight from the product spec data - no fluff, no "it depends".
Does the Xislet cord work with the Escort Redline 360c?
No. The listing explicitly excludes Redline 360c, MAX 3, MAX 360c, MAX 360, MAX 2 and MAX, since those use a different power interface.
What if I do not know which pin size my mirror plug needs?
The set ships with three sizes so you can test fit and use whichever pin count matches your mirror harness.
Is this cord fused?
Yes, each cord has a hand-soldered 2 amp fuse built into the line for circuit protection.