JET JSG-6DCK Belt and Disc Sander with Open Stand 6x48
- Disc Diameter: 12 inches
- Amperage Capacity: 12.8 amps
- Maximum Rotational Speed: 1725 rpm
- Grit Number: 60
Refresh date unavailable · Based on the Amazon listing and published specifications, not hands-on testing.
A capable dual-function sander for shops that already have floor space set aside and don't need an enclosed cabinet.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0000223MVModel: JSG-6DCKCategory: Combination Disc & Belt Sanders
Overview
The JET JSG-6DCK pairs a 6 x 48 inch sanding belt with a 12 inch disc on an open leg stand, powered by a 1.5 HP motor wired for 115 or 230 volt single phase. It suits a small shop that wants one machine for both edge and flat-face sanding.
Combining a belt and disc on one motor is a longstanding JET design, and the open stand keeps footprint and cost down compared with the enclosed cabinet version, the JSG-6CS. The dual voltage wiring gives some flexibility in how it gets connected on the shop circuit.
- 6 x 48 inch sanding belt
- 12 inch sanding disc
- 1.5 HP motor
- 115/230V single phase, open stand
Who it's for
Woodworkers and small shops that want belt sanding for edges and curves plus a disc for miters and flat stock, without buying two separate machines. Less suited to shops that want an enclosed base for dust or storage.
Pros and cons
- One motor runs both belt and disc
- 12 inch disc handles wider flat work
- Dual voltage 115/230V wiring
- Open stand keeps cost down
- Open stand leaves the mechanism exposed
- Single phase only, no three phase listed
- No enclosed base for dust or storage
Performance notes
The 1.5 HP motor drives both the 48 inch belt and the 12 inch disc, so the operator switches between long straight passes on the belt and flat or angled work on the disc without changing machines. Wiring for 115 or 230 volt single phase supports either a household or heavier shop circuit.
Specifications
| Brand | JET |
|---|---|
| Model | JSG-6DCK |
| Dimensions & fit | |
| Disc Diameter | 12 inches |
| Capacity & performance | |
| Amperage Capacity | 12.8 amps |
| Maximum Rotational Speed | 1725 rpm |
| Power & efficiency | |
| Voltage | 115 volts |
| Power Source | Corded electric |
| Included components | |
| Unit Count | 1 |
| Included Components | Belt/Disc Sander, Stand, Miter Gauge, Workstop, Lock Knobs (x2), Belt Tensioning Handle W/ Nut, Table Lock Handle, Abrasive Disc (60G), Abrasive Belt (60G), Manual, Hardware |
| Warranty & support | |
| Manufacturer Warranty Description | 5-Year Warranty (if used for commercial or industrial purposes then defaults to a 2-Year Warranty) |
| Other details | |
| Grit Number | 60 |
| Grit Type | Coarse |
| Shape | Rectangular |
| Number Of Items | 1 |
| Item Type Name | Belt And Disc Sander |
Frequently asked questions
What size belt and disc does the JET JSG-6DCK use?
A 6 x 48 inch sanding belt combined with a 12 inch sanding disc, both driven by the same 1.5 HP motor.
Does the JSG-6DCK have an enclosed cabinet?
No, this version ships on an open leg stand rather than the closed cabinet base used on the JSG-6CS.
What voltage does the JSG-6DCK run on?
It is wired for 115 or 230 volt single phase power.