Edelbrock 8817 Victor Series Mechanical Water Pump
- Equal flow to both sides of the block, within 1 percent
- 3/4 inch pilot shaft, heavy-duty ball/roller bearing
- 5-13/16 inches from block surface to hub
- 3/8 inch NPT auxiliary fittings at 45 degrees
- Black anodized finish, billet hub
- 8.2 pounds, 90 day manufacturer warranty
Updated 2 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A circle track and endurance racing water pump with even flow to both sides of the block and auxiliary outlets for custom plumbing. It is a race part, so street users should weigh the short warranty and racing focus.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B00062YCYWModel: 8817Category: Water Pumps
Overview
Plumbing custom coolant lines is easier on this Victor circle track pump, which has auxiliary water outlets and a revised impeller entry. It uses a billet hub, a thicker rear cover and a black anodized finish for durability.
The even distribution between block sides is meant to prevent hot spots, which the description links to detonation and pre-ignition. It is built for racing, and the listing gives no street application list.
Who it's for
For race engines where hot spots can cause detonation and where auxiliary fittings simplify plumbing. A road car owner who just needs a replacement should choose a standard pump.
Pros and cons
- Even coolant flow to both block sides
- Auxiliary outlets for custom plumbing
- Thicker rear cover for durability
- Billet hub and heavy-duty bearing
- Aimed at racing use
- Short manufacturer warranty
- Auxiliary fittings sold separately
Performance notes
Equal coolant distribution to both sides of the block helps prevent hot spots, which can cause detonation and pre-ignition. A revised impeller entry improves how coolant enters the pump, and the heavy-duty ball and roller bearing supports the shaft under race loads.
Specifications
| Brand | Edelbrock |
|---|---|
| Model | 8817 |
| Dimensions & fit | |
| Weight | 8.2 pounds |
| Weight class | Heavy Weight |
| Construction & materials | |
| Finish | Black anodized |
| Compatibility & installation | |
| Vehicle type | Car, Truck |
| Warranty & support | |
| Warranty | 90 Day Manufacturer |
| Other details | |
| Fit type | Vehicle Specific Fit |
| Bearing | 3/4 inch heavy-duty ball/roller |
| Block surface to hub | 5-13/16 inches |
| Hubs | Billet |
| Pilot shaft | 3/4 inch |
| Auxiliary fittings | 3/8 inch NPT at 45 degrees |
Frequently asked questions
Is the Edelbrock 8817 pump meant for cars or trucks?
The vehicle type field lists car and truck, and the description says it is designed for circle track and endurance racing.
What auxiliary fittings does the Edelbrock 8817 use?
It has 3/8 inch NPT auxiliary fittings at 45 degrees to the block, and the description says auxiliary fittings are available as AN or NPT.
Is the Edelbrock 8817 an electric pump?
No. It is a mechanical Victor Series circle track pump.