Beverage-Air DD94HC-1-B Draft Beer Cooler
- 5 kegs, behind 3 locking doors
- 95 inches wide, 29 inches deep, 52.5 inches high
- 37.82 cubic feet interior volume
- 2 dual faucet columns on a stainless steel top
- 1/3 HP self-contained refrigeration, R290 refrigerant
- 426 pounds empty
- NSF, cULus and UL EPH listed, made in USA
Last refreshed Jun 12, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A commercial direct-draw beer cooler for a bar pouring from several kegs at once, with locking doors and a stainless work top. It is heavy plug-in commercial equipment, not a home kegerator.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0029SJMT6Model: DD94HC-1-BCategory: Kegerators
Overview
Rolling kegs in through the locking front doors puts them on a reinforced stainless floor inside a galvanized cabinet, while beer lines run up to the dual faucet columns on the stainless steel top. Self-contained refrigeration means the condensing unit is built in and the cooler plugs into an outlet.
Several kegs on tap behind locking doors, with a stainless top that doubles as counter workspace, make it one piece of equipment for a busy draft station. The limitation is weight and footprint: it is wide and heavy and needs a commercial floor with the clearance to roll it in. The listing does not state voltage or amperage, so confirm the electrical requirement before ordering.
Who it's for
Commercial bars with a long back counter where kegs must stay cold and locked between shifts. Home users, and anyone without a wide level floor and a route to move a very heavy cabinet, should look at a smaller single-keg unit.
Pros and cons
- Door locks included
- Stainless steel top and reinforced floor
- Self-contained refrigeration, plugs in
- R290 hydrocarbon refrigerant
- Very heavy to move and place
- Wide footprint for a back bar
- Voltage and amperage not listed
- Galvanized interior, not stainless
Performance notes
A self-contained compressor system cools the cabinet, so holding temperature depends on the air around the unit and how often the doors open during service. The galvanized interior and reinforced stainless floor take the load of full kegs rolling in and out. Beer temperature at the faucet also depends on the line run inside the columns, which the listing does not describe.
Specifications
| Brand | Beverage-Air |
|---|---|
| Model | DD94HC-1-B |
| Dimensions & fit | |
| Item weight | 426 pounds |
| Product dimensions | 29 × 95 × 52.5 inches |
| Product Dimensions | 29 x 95 x 52.5 inches |
| Capacity & performance | |
| Capacity | 37.8 cu ft |
| Keg capacity | 5 kegs |
| Construction & materials | |
| Color | Black |
| Finish Types | Black exterior, stainless steel top |
| Compatibility & installation | |
| Installation Type | Ceiling Mount,Plug In |
| Other details | |
| Refrigeration type | Self-Contained, 1/3 HP |
| Number of doors | 3 |
| Door locks | Yes |
| Certification | NSF, UL |
| Refrigerant | R290 Hydrocarbon |
| Country of origin | USA |
| Faucet columns | 2 dual faucet columns |
| Form Factor | Compact |
| Model Info | DD94HC-1-B |
Frequently asked questions
What keg sizes does the Beverage-Air DD94HC-1-B hold?
The description says 5 keg capacity but does not name the keg size.
Is the Beverage-Air DD94HC-1-B a home kegerator?
No. It is a commercial draft beer cooler with NSF and UL certification, 3 doors and a 426 pound weight.