iGaging AngleCube Digital Level and Bevel Gauge
- 0.2 degree accuracy, 0.05 degree resolution
- 90 degree range
- Magnetic base for steel and cast iron
- Zero button for relative angles
- Large LCD
- Spare battery included
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A small, precise angle gauge for woodworkers setting saw blades, jointer fences and drill press tables. It needs a steel or cast iron surface to stick to.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B002LL0BICCategory: Construction Levels
Overview
Strong magnets in the base hold this iGaging cube to a saw blade, fence or cast iron table while its sensor reads the angle. Zero it on a reference surface, attach it to the blade and tilt until the screen shows the bevel you want.
Setting bevels by the number removes guesswork and test cuts on table saws and jointers. It only measures a quarter turn of angle, and non-magnetic surfaces need another way to hold it.
Who it's for
Shop woodworkers tuning table saws, band saws, jointers and drill presses. Builders leveling walls and floors need a full-length level.
Pros and cons
- Holds to steel by magnet
- Zero anywhere for relative readings
- Spare battery included
- Small enough for tight setups
- Limited angle range
- Needs a magnetic surface
- Few details on battery type
Performance notes
Zeroing on the table first means the cube reads the blade's angle relative to the table, which cancels any tilt in the saw itself. Accuracy depends on clean contact, since sawdust under the magnets skews the reading.
Specifications
| Brand | iGaging |
|---|---|
| Dimensions & fit | |
| Dimensions | 2-3/8 x 2-3/8 x 1-3/8 inches |
| Item Weight | 13.61 g |
| Capacity & performance | |
| Range | 90 degrees |
| Compatibility & installation | |
| Mounting | Magnetic base |
| Included components | |
| Included Components | AngleCube, spare battery |
| Unit Count | 1 Count |
| Other details | |
| Level Measurement Type | Digital |
| Resolution | 0.05 degrees |
| Accuracy | 0.2 degrees |
| Display | Large LCD |
Frequently asked questions
How big is the iGaging AngleCube?
It measures 2-3/8 x 2-3/8 x 1-3/8 inches.
How do I calibrate the iGaging AngleCube?
Set it on a flat reference surface, press the zero button, then attach it to the blade or fence.
Will the iGaging AngleCube stick to my saw blade?
Yes. Strong magnets hold it to steel or cast iron surfaces.
How accurate is the iGaging AngleCube?
0.2 degree accuracy with 0.05 degree resolution.