Sunex 1410 High Height Jack Stands 10 Ton
- 10 ton (20,000 lb) rating for the pair
- 28.1 to 46.5 inch height range
- 10 height intervals in 2 inch increments
- 3.1 x 5.1 inch saddle on each stand
- 15.7 x 15.7 inch base per stand
- 115.6 lb for the pair
- RSJSP locking pin with wire
- 1 year warranty
Last refreshed Sep 11, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A tall, heavy pin type pair for holding one end of a truck or trailer at working height. The high starting height rules out low vehicles, and the stands must go on a hard, level floor.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0093NBRHAModel: SUN1410Category: Jack Stands
Overview
Supporting one end of a truck or trailer at a high working height is the job of this matched Sunex pair. Each column is set at a height interval and held by a locking pin on a wire, while a wide square base spreads the load on a hard, level surface.
Truck and trailer owners get tall reach and a heavy rating, locked by a pin through the column. The high starting height suits tall vehicles only, and each stand is heavy to move around the shop.
Who it's for
Truck and trailer owners who lift a tall vehicle and need it held well above the floor will use the full range. Owners of everyday cars and anyone without a hard, level floor should choose something shorter.
Pros and cons
- Heavy rating for the pair
- Tall reach for raised trucks
- Many evenly spaced height positions
- Locking pin attached by wire
- Too tall for low vehicles
- Heavy to carry and reposition
- Needs a hard, level surface
- Supports one end only, not the whole vehicle
Performance notes
Stability comes from the wide base and how squarely the stands bear on the floor, which is why the maker calls for a hard, level surface. The pin carries the load through the column, so it must pass fully through before any weight comes down. Setting both stands to the same interval governs whether the vehicle rests level.
Specifications
| Brand | Sunex |
|---|---|
| Model | SUN1410 |
| Dimensions & fit | |
| Maximum Lifting Height | 46.5 inches |
| Minimum Height | 28.1 inches |
| Base size | 15.7 x 15.7 inches |
| Item weight | 115.6 pounds |
| Load capacity | 10 tons (20,000 lb) per pair |
| Height adjustment | 10 intervals in 2 inch increments |
| Saddle size | 3.1 x 5.1 inches |
| Construction & materials | |
| Material Type | Metal |
| Color | Red/Black |
| Compatibility & installation | |
| Compatible with Vehicle Type | Trailer, Truck |
| Warranty & support | |
| Manufacturer Warranty Description | 1 Year |
| Other details | |
| Lock type | RSJSP locking pin with wire |
| Automotive Fit Type | Universal Fit |
| Style Name | 10 Ton High |
Frequently asked questions
Can the Sunex 1410 jack stands be used on gravel or dirt?
The listing says the pair is intended to support one end of a vehicle on a hard level surface. Soft or loose ground is outside that use.
Will one pair of Sunex 1410 stands hold up a whole vehicle?
No. The matched pair is intended to support one end of a vehicle.
Which vehicles are the Sunex 1410 stands listed for?
Trucks and trailers. With a lowest setting of 28.1 inches, they suit vehicles with high clearance.
How do the Sunex 1410 stands lock at height?
The support column is secured with an RSJSP locking pin attached with wire.