Zoeller AquaNot Spin 508 ProPak Sump Pump System
- 1/2 HP M98 primary pump on 115 volts
- 12 V DC backup pump built into the AquaNot Spin 508 controller
- Up to 6 hours continuous backup, 48+ hours at 10% duty cycle, full battery
- 39 gpm flow rate, 22 feet max lift, as listed
- 1-1/2 inch Sch.-40 PVC, pre-plumbed, check valve included
- Self-testing controller, alerts for outage, high water, faults
- 12 x 12 x 12 inch listed dimensions
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A complete primary and battery backup sump package for a basement that must stay pumped through power outages. The backup battery is not named in the included parts, so plan to source one.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B00LES9OLICategory: Sump Pumps
Overview
Not just a single pump, the ProPak pairs a primary sump pump with a battery backup pump and a monitoring controller in one pre-plumbed assembly. The primary runs on household power, and the DC backup pump carries the pumping during outages from a charged battery.
Getting primary pumping, backup pumping and alarm monitoring from one maker in a pre-plumbed kit removes most of the guesswork of matching parts. The listing never names a battery among the included parts, so confirm that before ordering.
Who it's for
Homes with a basement sump that need protection during long outages get the most from the paired pumps and alarms. Owners happy with their current primary pump, or without a sump pit, would be installing parts they do not need.
Pros and cons
- Primary and backup pumps in one kit
- Controller self-tests and sends fault alerts
- Pre-plumbed with PVC discharge piping
- Check valve and float switch included
- Battery not listed among included parts
- Backup runtime limited by battery charge
- Unclear which pump the flow rating describes
- Polypropylene build, not cast iron
Performance notes
Day to day the primary pump does the work, and its flow falls as the vertical lift to the discharge point rises toward the rated maximum. During an outage, backup runtime depends on how charged the battery is and how often the pit refills, which is why the duty cycle rating stretches far beyond the continuous figure. The controller's self tests flag switch obstructions and pump faults before a storm exposes them.
Specifications
| Brand | Zoeller |
|---|
Frequently asked questions
What comes in the Zoeller 508-0007 ProPak?
The listing includes the M98 primary pump, the AquaNot Spin 508 controller with its DC backup pump, a check valve, float switch(es) and pre-plumbed PVC discharge piping. A battery is not named among the included parts, so confirm before ordering.
Is the Zoeller 508-0007 only a backup pump?
No. It is a full system with the M98 primary pump plus the DC backup pump and controller, pre-plumbed together.
What impeller does the Zoeller AquaNot backup pump use?
A glass-filled thermoplastic vortex impeller, paired with corrosion-resistant materials and a double-sealed DC pump.
Is the Zoeller ProPak tested before it ships?
Yes. The listing says the ProPak is 100% factory tested.
What is the Zoeller 508-0007 made of?
The listing gives polypropylene as the material type, with corrosion-resistant materials in the backup pump.