Mounting Dream MD2380 Full Motion TV Wall Mount
- Fits 32 to 70 inch TVs up to 110 lbs and VESA 400x400mm
- Full motion arm tilts 5 degrees up, 15 degrees down, and swivels side to side
- Extends 17.5 inches off the wall, retracts to 3.4 inches
- Needs 16 inch wall studs or concrete, not rated for drywall alone
- 6 articulating arms, robot-welded steel construction
- Plus or minus 3 degree leveling adjustment after the TV is hung
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
Six articulating arms give this mount real reach for a 32 to 70 inch TV, but the bracket only holds to a 16 inch stud or concrete, never drywall alone.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B00SFSU53GModel: MD2380Category: TV Mounts
Overview
Six welded arms carry a 32 to 70 inch TV away from the wall, tilting 5 degrees up and 15 degrees down while swiveling toward either side. Installation runs through a single 16 inch stud or concrete anchor, with a paper template and pre-labeled hardware bags provided.
Pulling out to 17.5 inches and swiveling on six arms is what separates this from a flat mount, letting the screen turn toward a kitchen or a corner sofa. That motion depends on a solid 16 inch stud or concrete behind the drywall, so a hollow wall kills the option entirely.
Who it's for
Renters and homeowners mounting a mid to large TV in a room where the seating angle changes, like a kitchen or corner living room, will get the most from the swivel and tilt range. Anyone without a 16 inch stud or concrete wall behind the install spot should not buy this mount.
Pros and cons
- Tilts, swivels, and extends on 6 arms
- Fits a wide 32 to 70 inch TV range
- Post-install leveling adjustment built in
- Lifetime warranty from the manufacturer
- Not rated for drywall-only installation
- Needs precise 16 inch stud spacing
- No cable management channel mentioned
Performance notes
The six-arm articulating design is what allows the long 17.5 inch extension and side to side swivel without sagging, since the load spreads across multiple welded joints instead of one pivot. Tilt range comes from a separate hinge at the plate, capped at 15 degrees down, which cuts overhead glare but will not angle the TV for a ceiling-height install.
Specifications
| Brand | Mounting Dream |
|---|---|
| Model | MD2380 |
| Weight | 11.2 pounds |
| Brand Tech | Mounting Dream |
| Color | Black |
Frequently asked questions
What size TVs fit the Mounting Dream MD2380?
It fits most 32 to 70 inch TVs up to 110 lbs with a VESA pattern up to 400x400mm.
Can the MD2380 go on drywall?
No, Mounting Dream specifies a 16 inch wood stud or concrete; it is not rated for drywall alone.
How far does the mount extend from the wall?
The arm pulls out to 17.5 inches and retracts to 3.4 inches against the wall.
Does it tilt and swivel?
Yes, it tilts 5 degrees up and 15 degrees down and swivels left or right on 6 articulating arms.