Kegco Commercial Three Faucet Kegerator
- 3 full size or pony kegs, or up to 6 quarter slim or 11 x 5 gallon kegs with external CO2
- One single and one dual faucet tower, 3 taps total
- No direct draw kit: CO2 cylinder, regulator, couplers, air line and clamps needed
- 31 to 41 F adjustable by a dial inside, digital display outside
- Forced air cooling with hoses feeding each tower
- 2 adjustable shelves, rubber floor mat, drip trays with external drains
- 3 doors, key locks, built-in or freestanding
- 308 lb, automatic defrost, R134a refrigerant
Refresh date unavailable · Based on the Amazon listing and published specifications, not hands-on testing.
A commercial three-tap keg cooler for a bar or event space that pours from three kegs at once and can be built into a counter. The dispensing kit is not in the box, so gas gear and couplers must be sourced before the first pour.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B00SHGH8QSModel: XCK-2472BCategory: Kegerators
More from this brandAll Kegco kegeratorsOverview
A forced air refrigeration system cools the cabinet of this Kegco unit and pushes chilled air through hoses into both towers, so the beer line stays cold up to the faucet. Three locking doors open onto a stainless interior with a rubber mat for the kegs and adjustable shelves. The cooling unit is reached from the front.
Three taps, three doors and a front-serviced cooling unit make this a bar fixture that can go under a counter or stand alone. Nothing dispenses on day one, though, because the gas cylinder, regulator, couplers and lines are not in the box.
Who it's for
Designed for a commercial bar line or a catering operation that already owns couplers and gas gear and needs cold storage for several kegs plus bottles. A first-time kegerator owner without dispensing parts will have to assemble the kit separately.
Pros and cons
- Pours from three kegs at once
- Two draft towers included
- Forced air cooling to the faucet
- Built-in or freestanding
- Direct draw kit not included
- Temperature dial is inside the cabinet
- No voltage or warranty listed
Performance notes
Chilled air is blown through the cabinet and ducted into each tower, which stops beer warming in the line between keg and faucet. The cooling unit is serviced from the front, so the cabinet can be enclosed on the sides and back. Automatic defrost clears frost so airflow stays open, and the rubber mat spreads the load of a full keg on the floor.
Specifications
| Brand | Kegco |
|---|---|
| Model | XCK-2472B |
| Dimensions & fit | |
| Item weight | 308 pounds |
| Product dimensions | 24.5 × 72 × 36.2 inches |
| Capacity & performance | |
| Defrost system type | Automatic |
| Cooling method | Forced air compressor |
| Construction & materials | |
| Color | Black |
| Door material type | Stainless Steel |
| Compatibility & installation | |
| Installation Type | Freestanding |
| Other details | |
| Form Factor | Side By Side |
| Lock type | Key |
| Number of doors | 3 |
| Refrigerant | R134a |
Frequently asked questions
What do you need to buy to use the Kegco XCK-2472B?
A CO2 cylinder, a CO2 regulator, keg couplers matching your kegs, air line and clamps. The bullets state the direct draw kit is not included.
Can the Kegco XCK-2472B be built into a bar counter?
Yes. The cooling unit is accessed from the front, and the listing names both built-in and freestanding use.
How do you set the temperature on the Kegco XCK-2472B?
A manual dial inside the cabinet sets it and a digital display outside shows the current reading, so the door stays closed while checking.
Does the Kegco XCK-2472B hold bottles too?
Yes. Two adjustable shelves let one side hold cans, bottles or mugs while kegs occupy the other.