SEAFLO 06 Series Automatic Submersible Bilge Pump
- 750 GPH, 12.5 gpm flow
- 12 volt DC supply
- 3/4 inch outlet
- 8.2 foot maximum lift
- Float switch built in, snap-off strainer
- 4 year warranty
Last refreshed Oct 2, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A compact automatic bilge pump with a built-in float switch and a removable strainer, suited to small boats. The flow rating is modest, so larger boats may need a bigger unit.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B013XR6W26Model: SFBP1-G750-06Category: Bilge Pumps
Overview
A boat owner gets a pump and a float switch in one body here, so the pump starts when water rises. The snap-off strainer comes off for cleaning, and the polypropylene shell is made for submerged use.
The advantage is one compact unit that handles detection and pumping without separate wiring for a switch. A warranty card is in the box. The limitation is capacity, since this is a small-boat flow rating, and no wiring or hose details are listed.
Who it's for
Skiffs, small cruisers and similar boats that collect water while moored will use the automatic float switch. Boats needing large capacity, redundant pumps or manual-only control should look at other pumps.
Pros and cons
- Pump and float switch in one
- Snap-off strainer cleans easily
- Warranty card in the package
- Flow suits small boats only
- Wiring instructions not included in listing
- Hose size beyond outlet not given
- Float switch sensitivity not stated
Performance notes
The float rises with the water level, closing a switch that starts the pump, so the pump runs only when needed. Flow falls as lift height and hose length increase. A clogged strainer cuts flow, which is why it snaps off.
Specifications
| Brand | SEAFLO |
|---|---|
| Model | SFBP1-G750-06 |
| Dimensions & fit | |
| Item Dimensions L x W x H | 5.7 inches L x 3.2 inches W x 4 inches H |
| Maximum Lifting Height | 8.2 feet |
| Outlet | 3/4 inch |
| Weight | 1.3 pounds |
| Capacity & performance | |
| Flow Rate | 750 GPH (12.5 gpm) |
| Power & efficiency | |
| Voltage | 12 volts DC |
| Construction & materials | |
| Material Type | Polypropylene (PP) |
| Color | White |
| Warranty & support | |
| Manufacturer Warranty Description | 4 year |
| Other details | |
| Application | Marine Bilge Systems |
| Impeller | 5 Blade High Efficiency |
| Max Draw | 5.0A |
| Operation | Automatic Float Switch |
| [ SPECIFICATIONS ] | Model: SFBP1-G750-06 |
| Wire Lead | 3 ft (1 m) |
Closest rivals on specs
Rule 25SA, 12V Automatic Bilge Pump - Fully Submersible - 500GPH- Flow Rate 12.5 vs 8.33 gpm (+50%)
- Maximum Lifting Height 8.2 vs 1.75 feet (+369%)
Attwood WaterBuster Portable Submersible Pump- Flow Rate 12.5 vs 3.33 gpm (+275%)
- Maximum Lifting Height 8.2 vs 3.3 feet (+148%)
Frequently asked questions
What do I need to install the SEAFLO 06 bilge pump?
The pump has a 3/4 inch outlet and runs on 12 volts DC. The listing does not list hose, wire or fasteners.
Does the SEAFLO 06 need a separate float switch?
No. The title says the pump and float switch are all in one.
Is the SEAFLO 06 for large boats?
The listing rates it at 750 GPH for boats, and gives no vessel size limit.
What comes with the pump?
One 06 series 750 gph auto bilge pump and a 4-year warranty card.