Sanus VLT6-B1 TV Mount
- Fits 46 to 90 inch TVs, up to 150 lbs
- Tilts up to 12 degrees, tool-free
- Pulls out 5.7 inches for cable access, then pushes flat again
- VESA 200x100mm to 690x415mm
- About a 30 minute install with drill template and hardware included
- UL-listed, 5-year warranty
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A tilting mount built for large 46 to 90 inch TVs up to 150 lbs, with a 5.7 inch pull-out for reaching cables and a tool-free 12 degree tilt; it needs a wood stud, concrete, or block wall.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B01N1SSOUCModel: VLT6Category: TV Mounts
Overview
Sanus built the VLT6-B1 for large-format TVs rather than everyday full-motion use. The bracket comes preassembled and pulls out 5.7 inches so cables stay reachable after the TV is hung, then pushes back flat against the wall.
Scale is the strength here: it covers TVs up to 90 inches and 150 lbs with a wide VESA range, and a drill template speeds up a job that size. It only tilts, though, so it will not angle toward an off-center seat the way a full-motion arm would.
Who it's for
Fits a large living room or media wall TV, 46 inches and up, where a stud or block wall is available. Not for anyone who wants the screen to turn toward a side seat, since this mount only tilts.
Pros and cons
- Rated to 150 lbs and 90 inches
- Tool-free tilt up to 12 degrees
- 5.7 inch pull-out for cable access
- Preassembled bracket, drill template included
- Tilt only, no swivel
- Large size needs a stud or block wall
Performance notes
The pull-out extension is a fixed sliding rail rather than an articulating arm, so it moves the TV straight out from the wall for cable access and locks flat again rather than swiveling. Tilt is set by a tool-free mechanism, and because the mount and TV can weigh well over 100 lbs combined, it depends on a wood stud, concrete, or block wall rather than drywall alone.
Specifications
| Brand | Sanus |
|---|---|
| Model | VLT6 |
| Weight | 0.01 pounds |
| Brand Tech | Sanus |
| Color | Black |
Frequently asked questions
What size TVs fit the Sanus VLT6-B1?
46 to 90 inch TVs up to 150 lbs, with VESA from 200x100mm to 690x415mm.
Does this mount swivel?
No, it tilts up to 12 degrees tool-free but does not swivel side to side.
How do I reach the cables after the TV is mounted?
The bracket pulls out 5.7 inches from the wall for access, then pushes back flat.
What wall types does it need?
A wood stud, concrete, or block wall; it is not rated for drywall alone.