Aiphone JO-DV Video Door Station
- Wired analog door station, not a Wi-Fi doorbell
- Works with JO Series or the GT-MKB-N guard station
- Powered by the monitor, no separate supply
- IP54 and IK08 zinc die cast cover
- 1/4 inch CMOS camera, white LED for night
- 330 ft wiring at 18AWG, 2 conductor
- -40 to 140F, 6-13/16 x 3-7/8 x 1-1/16 in
Updated 22 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A rugged wired video door station for Aiphone JO Series intercoms, powered over the same two wires as its monitor. It does nothing on its own and offers no app or cloud features.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B07N5C8VKZCategory: Video Doorbells
Overview
Aiphone built this zinc die cast door station to feed video and hands free audio to a JO Series monitor over two wires, with power coming back from the monitor. It surface mounts on a single gang electrical box.
Owners of an Aiphone JO system get a vandal resistant outdoor station that runs in extreme cold and heat. It needs a compatible indoor monitor and wiring, and offers no phone app, recording or cloud alerts.
Who it's for
Installers adding or replacing an entry station on a JO Series system will find it a direct fit. Homeowners without an Aiphone monitor need a full kit or a smart doorbell instead.
Pros and cons
- Impact resistant zinc cover
- Powered by the monitor
- Long two wire runs
- White LED and lit nameplate
- Needs a compatible Aiphone monitor
- No app, recording or cloud
- Narrow camera view at close range
Performance notes
Image coverage depends on the small CMOS camera, which frames a modest area at close range, so mounting height matters. Night images rely on the white LED rather than infrared. Wire gauge governs how far the station can sit from the monitor.
Specifications
| Brand | Aiphone |
|---|---|
| Dimensions & fit | |
| Item dimensions | 6-13/16 x 3-7/8 x 1-1/16 inches |
| Capacity & performance | |
| Operating temperature | -40 to 140 F (-40 to 60 C) |
| Power & efficiency | |
| Power Source | Supplied by the monitor |
| Construction & materials | |
| Enclosure Material | Zinc die cast |
| Compatibility & installation | |
| Mount type | Surface mount, 1 gang electrical box |
| Compatible Devices | Aiphone JO Series, GT-MKB-N video guard station |
| Other details | |
| Night Vision | White LED, backlit nameplate |
| Waterproof Rating | IP54, IK08 impact |
| Audio | Hands-free, 72.1 dB |
| Field Of View | 2 ft 1 in vertical x 3 ft 1 in horizontal at 20 inches |
| Camera | 1/4 inch CMOS |
| Wiring | 2 conductor, low cap, non-shielded, Aiphone #871802, 330 ft at 18AWG |
Frequently asked questions
How do I care for the Aiphone JO-DV outdoors?
The listing gives no cleaning steps. Its zinc die cast cover carries IP54 and IK08 protection and operates from -40 to 140F.
Does the Aiphone JO-DV need its own power supply?
No. Power is supplied by the monitor over the two conductor wire.
Does the Aiphone JO-DV work with a phone app?
No app is described. It is an analog station for the JO Series or the GT-MKB-N guard station.
How far can the JO-DV be from the monitor?
Up to 330 ft using 18AWG Aiphone #871802 wire.