Orei 4K 1x8 HDMI Splitter

Overview

A buyer feeding one media source to a wall of displays gets eight mirrored outputs from a single powered box. The splitter reads the source once, applies EDID so the connected screens negotiate a shared format, and drives every output with the same picture and sound. It duplicates rather than switches, so all screens show one program at a time.

Sending one signal to many screens usually means daisy chaining or a matrix switcher, and this box does neither. It takes a single HDMI feed and repeats it across eight outputs with EDID management and surround audio carried through, which suits signage, sports bars and classrooms where everyone watches the same thing. The limitation is that duplication is the whole job: no independent routing, no scaling per screen, and the source itself must be able to feed the chain.

Who it's for

A venue or classroom with several displays showing the same broadcast benefits from one powered box instead of a chain of splitters. Those who need per-screen routing, mixed resolutions or a switcher between sources should look elsewhere, because every output here carries the same signal.

Pros and cons

Performance notes

The source negotiates one EDID profile for the whole chain, so every display receives the same resolution and audio stream. Bandwidth is shared across the outputs, and long cable runs on the far screens can weaken the signal, which is why the powered design matters. Screens that cannot accept the negotiated format may drop out until the chain agrees on a lower common mode.

Specifications