ENEACRO ENRH3203 SDS-Plus Rotary Hammer Drill 12.5 Amp
- Maximum Chuck Size: 1.25 Inches
- Drill Type: Hammer Drill
- Power Source: Corded Electric
- Torque: 51 in-lb
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A 12.5 amp corded drill built with torque in mind over speed, useful when you need sustained power without watching a battery gauge.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B07ZQY2XVQModel: ENRH3203Category: Drills
Overview
A corded electric drill from ENEACRO drawing 12.5 amps at 120 volts, with an 880 RPM top speed. At 11.1 pounds and about 15 by 10 by 4.33 inches, it plugs into a wall outlet rather than running on a battery.
The 12.5 amp draw is high for a drill motor, and paired with an 880 RPM top speed it points to a tool geared for torque over raw spin speed. That combination suits boring larger holes or turning mixing paddles more than quickly driving small screws. Being corded means no battery to charge or swap mid job.
- 120 volt corded electric power
- 12.5 amp motor
- 880 RPM top speed
- 11.1 pounds, about 15 x 10 x 4.33 inches
Who it's for
Fits users who need steady corded power for demanding drilling or mixing tasks and do not mind trading portability for a plug-in cord. Less suited to anyone who wants a cordless drill for quick around-the-house jobs.
Pros and cons
- Corded power avoids battery charging or fade
- High 12.5 amp draw suggests strong torque
- Plugs in and runs at full power immediately
- Cord limits reach and portability
- At 11.1 pounds it is heavier than compact drivers
- No clutch, chuck size or bit data listed
Performance notes
Running at 12.5 amps but only 880 RPM top speed, the motor trades raw spin rate for torque, which suits large-diameter bits or mixing attachments better than fast small-screw driving. Being corded, output stays constant since there is no battery to fade over a job.
Specifications
| Brand | ENEACRO |
|---|---|
| Model | ENRH3203 |
| Dimensions & fit | |
| Maximum Chuck Size | 1.25 Inches |
| Item Weight | 11.1 poundshigher than 80% of 238 drills |
| Item Dimensions L X W X H | 15 × 10 × 4.3 inches |
| Capacity & performance | |
| Maximum Rotational Speed | 880 rpmlower than 79% of 178 drills |
| Speed | 880 RPM |
| Drilling Capacity Metal | 0.5 inches |
| Drilling Capacity Wood | 1.2 incheshigher than 70% of 154 drills |
| Number Of Speeds | 3 |
| Power & efficiency | |
| Power Source | Corded Electric |
| Maximum Power | 1500 wattshigher than 82% of 155 drills |
| Amperage | 12.5 ampshigher than 78% of 166 drills |
| Voltage | 120 voltshigher than 85% of 255 drills |
| Construction & materials | |
| Material Type | Plastic |
| Color | Blue |
| Compatibility & installation | |
| Compatible Devices | SDS Plus accessories |
| Included components | |
| Unit Count | 1 |
| Included Components | ENRH3203 Rotary hammer*1; 6-inch Drill bits*3(8mm, 10mm, 12mm); 10-inch Point chisel*1, 10-inch Flat chisel*1; Auxiliary handle*1； Replaceable Carbon Brush 1 Set; 329Grease*1； Dust Proof cap*1； 24 Months Defect Free Support. |
| Other details | |
| Drill Type | Hammer Drill |
| Torque | 51 in-lblower than 71% of 154 drills |
| Maximum Torque | 62 in-lblower than 79% of 137 drills |
| Is Electric | Yes |
| Additional Features | Adjustable Handle, Keyless Chuck, Safety Clutch, Vibration Control Handle |
Closest rivals on specs
Frequently asked questions
What power source does the ENEACRO ENRH3203 use?
Corded electric, plugging into a 120 volt outlet.
How fast does it spin?
It has an 880 RPM top speed.
How much does it weigh?
11.1 pounds, with dimensions of about 15 by 10 by 4.33 inches.