Mounting Dream MD2104 Tilt Wall Mount
- Fits 42 to 90 inch TVs up to 120 lbs with VESA up to 600x400mm
- Extends up to 7 inches from the wall and retracts to 2.68 inches
- Tilts up to 15 degrees with about 1 degree of post install leveling
- Needs 16, 18 or 24 inch wood studs, or a concrete wall, not drywall alone
- 10 year warranty, ships with a drilling template and labeled hardware
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A tilt-only steel bracket for 42 to 90 inch TVs that mounts to wood studs or concrete. It levels itself after install and clears wall outlets, but there is no swivel for angled seating.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B086WBMB6FModel: MD2104Category: TV Mounts
Overview
This is a wall bracket that carries a flat screen TV and tilts the picture down to cut glare from windows or ceiling lights. The plate stands off the wall enough to route cables and clear a power outlet, and a drawstring release lets the panel lock onto or come off the arms without extra tools.
One bracket covering a huge span of TV sizes means a single purchase works whether the household upgrades to a bigger screen later. The mechanism only tilts, so anyone who wants to swing the screen toward a couch off to the side of the wall will find the picture locked facing straight ahead.
Who it's for
Suits a bedroom or living room wall where the TV sits directly across from the seating and just needs to tilt down to kill glare. Anyone bolting to drywall alone, or watching from a sharp side angle, should look at a mount built for those cases instead.
Pros and cons
- Wide TV size range on a single bracket
- Self leveling tilt after installation
- Open plate clears wall outlets behind the TV
- Robot welded steel construction
- Tilt only, no swivel or side to side motion
- Requires wood studs or a concrete wall
- Concrete anchors must be requested, not included
Performance notes
The plate bolts into studs or concrete, then the TV bracket hangs on it and locks with a pull cord release so it will not slide off during setup. Loosening the tilt hinge lets the panel angle downward to cut glare, and because the plate stands off the wall the TV can sit over an outlet without covering it.
Specifications
| Brand | Mounting Dream |
|---|---|
| Model | MD2104 |
| Weight | 7.8 pounds |
| Brand Tech | Mounting Dream |
| Color | Black |
Frequently asked questions
Does the Mounting Dream MD2104 swivel or only tilt?
It tilts only. There is no side to side swivel arm, so the screen stays facing the direction the bracket is mounted.
Will this MD2104 mount work on drywall alone?
No. It needs wood studs at the spacing listed in the specs, or a solid concrete or brick wall behind the drywall.
Are concrete anchors included?
Not by default. Mounting Dream sends concrete anchors only if requested separately.
Can the mount sit over a wall outlet?
Yes, the open plate design leaves clearance so the bracket can be installed directly over an outlet.