ORTUR Laser Master 2 S2 LU2-10A Laser Engraver
- 10000mW laser module, 10W optical
- 390*410mm engraving area
- Cuts 30mm acrylic and 20mm wood
- 0.05mm x 0.1mm compressed spot
- Class 4 laser
- LaserGRBL and LightBurn compatible
- 10-15 minutes assembly
Last refreshed Sep 6, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A diode laser engraver and cutter for hobbyists who want to cut wood and acrylic and mark metal at home. It is a high power laser that needs ventilation and eye protection, and air assist hardware is not included.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B08CBV9FQ2Category: Engraving Machines & Tools
Overview
Hobbyists and small shop makers get a desktop diode laser that engraves and cuts on a large bed. Assemble the metal frame, load a design in LightBurn or LaserGRBL, and the module burns the pattern into wood, acrylic or coated metal.
Owners get serious cutting depth for a desktop diode laser plus safety cutoffs if the frame tips or the computer drops out. It is a high power open frame laser, so ventilation, a fire safe surface and an air assist pump are on you.
Who it's for
Craft sellers and DIYers making signs, coasters and cut parts will use the bed size. Anyone working in a shared room without ventilation should not run an open laser.
Pros and cons
- Large engraving area
- Cuts thick wood and acrylic
- Tilt and disconnect safety stops
- Protective cover filters UV
- Air pump not included
- Needs ventilation for smoke
- Open frame laser hazard
Performance notes
Cutting depth depends on laser power, focus and how many passes you run, with the small compressed spot giving fine detail. An air assist port helps clear smoke for cleaner cuts but needs a separate pump. Dual fans cool the module during long jobs.
Specifications
| Brand | Ortur |
|---|---|
| Dimensions & fit | |
| Spot size | 0.05mm x 0.1mm |
| Capacity & performance | |
| Laser output | 10000mW (10W optical) |
| Construction & materials | |
| Frame material | Full metal |
| Material limits | Cuts 30mm acrylic and 20mm wood |
| Compatibility & installation | |
| Compatible devices | Win 7, Win 8, XP, Win 10, Win 11; MAC with LightBurn |
| Included components | |
| Included Components | Laser engraver, protective goggles |
| Other details | |
| Laser class | Class 4 |
| Working area | 390*410mm |
| Software | LaserGRBL, LightBurn |
| Safety features | G-sensor tilt stop, USB disconnect stop, idle shutoff, protective cover |
| Air assist | Built-in air-assist interface |
Frequently asked questions
How long does the ORTUR Laser Master 2 S2 take to assemble?
About 10-15 minutes, per the listing. The ground wire in the package can be ignored; it is already inserted for the 10W module.
Does it come with an air pump?
It has a built-in air-assist interface, but no pump is listed.
Will it run on a Mac?
Yes, with LightBurn. LaserGRBL is listed for Windows.
Is eye protection included?
Yes. Protective goggles are in the package.