Perlesmith Full-Motion TV Wall Mount PSXLF01
- Fits 42 to 90 inch TVs, VESA 200x100mm to 800x400mm, up to 150 lbs.
- 42.72 inch extension arm swivels up to 90 degrees to each side.
- Tilts up 5 or down 15 degrees, plus a post-install level adjustment of 4 degrees.
- Retracts to 4.5 inches from the wall and mounts on 16 to 24 inch studs or masonry.
- 10-year warranty with cable clips built into the arm.
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A long-arm full motion mount that extends, swivels and tilts, then folds back flat against the wall. It needs studs on a normal spacing or a masonry wall to carry a large screen safely.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B08FWVBPGPModel: PSXLF01Category: TV Mounts
Overview
This is a wall-mounted bracket with a folding articulating arm, not a fixed plate. It bolts into wood studs or masonry, then the arm extends so the TV can swivel toward a seating position and retract flat again when not in use.
The extension arm is the main reason to buy it: the TV can be pulled out, swiveled toward the viewer, tilted and leveled after installation, which suits corner rooms or beds where a fixed mount would not aim the screen correctly. The limitation is the installation itself, since it depends on locating studs at the right spacing or drilling into concrete or brick.
Who it's for
Fits a room where the seating is off to the side or the mount goes in a corner, since the arm pulls the screen out and turns it toward the viewer. It is not for a flat wall installation where a fixed, low-profile plate would do the job with less hardware.
Pros and cons
- Long articulating extension arm
- Wide swivel range each side
- Retracts close to the wall
- Tilts up or down
- Needs evenly spaced studs or masonry
- Heavier hardware than a fixed mount
- More parts to assemble than a fixed plate
Performance notes
The articulating arm uses multiple pivot points so the TV can extend away from the wall, swivel toward the viewer and fold back flat, instead of staying at a single fixed distance and angle. A separate leveling adjustment corrects any tilt left over from the wall mounting itself, which matters most on brick or uneven stud walls.
Specifications
| Brand | Perlesmith |
|---|---|
| Model | PSXLF01 |
| Dimensions & fit | |
| Minimumsupported Screen Size | 37 inches |
| Maximumsupported Screen Size | 75 inches |
| Construction & materials | |
| Color | Black |
| Enclosure Material | Alloy Steel |
| Compatibility & installation | |
| Mounting Type | Wall Mount |
| Compatible Devices | Television |
| Included components | |
| Unit Count | 1 |
| Warranty & support | |
| Warranty Description | 10 years |
| Other details | |
| Movement Type | Articulating |
| Number Of Items | 1 |
| Mfr Part Number | PSXLF01 |
| Maximum Tilt Angle | 15 degrees |
| Item Highlight | 42.72″ Extension, Swivel, Tilt, Level, 150 Lbs Max Load, Fits 16″/18″/24″ Wood Studs, Max VESA 800x400mm |
Frequently asked questions
What is the maximum TV size for the Perlesmith PSXLF01?
It fits 42 to 90 inch TVs with a VESA pattern up to 800x400mm and a weight limit of 150 lbs.
How far does the Perlesmith PSXLF01 extend from the wall?
The articulating arm extends 42.72 inches and retracts back to 4.5 inches from the wall.
What wall types work with the PSXLF01?
It installs on 16 to 24 inch wood studs or on concrete and brick with the included hardware.
Does the PSXLF01 tilt and swivel?
It tilts 5 degrees up or 15 degrees down, swivels up to 90 degrees to each side, and can be leveled by 4 degrees after installation.
Does the Perlesmith PSXLF01 come with a warranty?
Yes, it carries a 10-year manufacturer warranty.