Hemudu Tabletop TV Stand HT09B-001
- Fits 27 to 60 inch TVs, VESA 100x100mm to 400x400mm, up to 88 lbs.
- Fixed base, no swivel or tilt, with 4 height adjustment levels.
- Cable pass-through port routes cords through the tempered glass base.
- About 15 minutes to install with the included screws and tools.
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A fixed tabletop stand with a cable pass-through built into the glass base. It does not swivel or tilt, so the viewing angle is set once at installation.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B08V4RF89GModel: HT09B-001Category: TV Mounts
Overview
This is a tabletop base built around a tempered glass plate, with a metal bracket that bolts to the back of the TV. Cables run through a port in the base instead of hanging loose, and the height locks into a fixed set of positions instead of sliding freely.
The main advantage is the built-in cable routing and a wide VESA range that covers most mid-size TVs, with a quick setup. The limitation is that the base is fixed, so there is no swivel or tilt to aim the screen after it is installed.
Who it's for
Fits a media console or table where the TV faces the room straight on and tidy cable routing matters. It is not for a room where the seating is off to one side, since the base does not turn.
Pros and cons
- Cable pass-through in the base
- Fits a broad range of TV sizes
- Multiple height positions
- Tempered glass base
- Fixed base, no swivel
- No tilt adjustment
- No stated warranty
Performance notes
The bracket sets the TV height at one of several fixed points on the pillar, and because there is no articulating joint, the screen stays at whatever angle it is bolted at. The main moving part is the cable port, which keeps wiring inside the base rather than affecting how the TV sits.
Specifications
| Brand | Hemudu |
|---|---|
| Model | HT09B-001 |
| Dimensions & fit | |
| Minimumsupported Screen Size | 27 inches |
| Maximumsupported Screen Size | 60 inches |
| Construction & materials | |
| Color | Black |
| Enclosure Material | Metal |
| Compatibility & installation | |
| Mounting Type | Tabletop Mount |
| Compatible Devices | Television |
| Included components | |
| Number Of Packs | 1 |
| Other details | |
| Movement Type | Fixed |
| Number Of Items | 1 |
| Mfr Part Number | HT09B-001U |
| Maximum Tilt Angle | 9 degrees |
Frequently asked questions
Does the Hemudu HT09B-001 swivel or tilt?
No. It is a fixed base; only the height adjusts, across 4 levels.
What TV sizes fit the Hemudu HT09B-001?
It fits 27 to 60 inch TVs with VESA patterns from 100x100mm to 400x400mm, up to 88 lbs.
Does the HT09B-001 have cable management?
Yes, cables route through a pass-through port built into the glass base.
How long does the Hemudu stand take to install?
The maker states about 15 minutes using the included screws and tools.