Perlegear PGLF8 Full Motion TV Wall Mount
- Fits 42 to 90 inch TVs VESA 200x100mm up to 600x400mm
- Holds up to 132 lbs UL listed and rated to 4x that load in testing
- Swivels 50 degrees each way tilts 5 up, 15 down, plus 3 degree post-install leveling
- Extends 16.6 inches, retracts to 3 inches for a flush or pulled out view
- Mounts to 8, 12, or 16 inch studs or concrete and brick walls
- Steel build with security locks and anti-drop edges once installed
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
This full-motion mount handles large TVs with real swivel and tilt range, built to UL standards and rated well past its 132 lb limit; just confirm your stud spacing before buying.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0B6B51RXCModel: PGLF8Category: TV Mounts
Overview
A full-motion wall mount built for large screens, this one lets a 42 to 90 inch TV swivel, tilt, and pull away from the wall on steel articulating arms. It bolts into wood studs, concrete, or brick, and the arms retract to a 3 inch profile when not in use.
Real range of motion sets this apart from a basic tilt mount, with full swivel, tilt, and extension on TVs up to 90 inches. The catch is stud spacing: anything past 16 inches needs a separate extension bracket the box does not include.
Who it's for
A living room or bedroom where the TV needs to swivel toward a sofa, kitchen pass-through, or corner seating is the target here, on a wall that is standard wood stud, concrete, or brick. Anyone with non-standard 24 inch stud spacing, or who only needs a fixed flat mount, should look elsewhere.
Pros and cons
- UL listed, tested to 4x rated load
- 132 lb capacity for large TVs
- 50 degree swivel plus tool-free tilt
- Retracts to a 3 inch low profile
- 24 inch stud spacing needs a separate bracket
- Confirm VESA pattern before buying
- Only 15 degrees of downward tilt
Performance notes
Steel bearings and precision washers at each joint carry the swivel and tilt motion, so the arm holds position instead of drifting once set. The dual articulating arms spread the TV's weight across a reinforced wall plate rather than a single pivot point, which is what lets the mount carry loads beyond its rated 132 lbs in testing.
Specifications
| Brand | Perlegear |
|---|---|
| Model | PGLF8 |
| Dimensions & fit | |
| Minimumsupported Screen Size | 42 inches |
| Maximumsupported Screen Size | 85 inches |
| Construction & materials | |
| Color | Black |
| Enclosure Material | Alloy Steel |
| Compatibility & installation | |
| Mounting Type | Wall Mount |
| Compatible Devices | Television |
| Included components | |
| Unit Count | 1 |
| Warranty & support | |
| Warranty Description | 2 years |
| Other details | |
| Movement Type | Full Motion,Swivel,Tilt |
| Number Of Items | 1 |
| Mfr Part Number | PGLF8 |
| Maximum Tilt Angle | 15 degrees |
| Item Highlight | Heavy Duty TV Mount With Dual Articulating Arms, Tool-Free Smooth Tilt, Swivel, Fits 16" Studs, Max VESA 600x400mm, PGLF8 |
Frequently asked questions
What size TVs does the Perlegear PGLF8 fit?
It fits most 42 to 90 inch flat or curved TVs with a VESA pattern between 200x100mm and 600x400mm, up to 132 lbs.
Does the PGLF8 work with 24 inch stud spacing?
Not out of the box. It is built for 8, 12, or 16 inch stud spacing, concrete, or brick; 24 inch spacing needs a separate extension bracket.
How far does the mount extend from the wall?
It pulls out to 16.6 inches and retracts to a 3 inch low profile when pushed back flat.
Can I still reach the cables after mounting?
Yes, the open wall plate design leaves room for an in-wall cable management kit, and cable ties are included.