AUDIOZERONE Car Audio Amplifier ZE1000.1 2000W Monoblock Class D MOSFET Subwoofer Audio
- 1 channel monoblock, Class D MOSFET
- 2000 watts output power
- 1 to 4 ohm stable
- 14.4 volts nominal, 16 volts maximum supply
- Low pass crossover built in
- 11 x 6.9 x 2 inches, metal body
- FCC specification met
Last refreshed Oct 2, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A single channel Class D amplifier aimed at powering one subwoofer or a pair wired to a low load. The power rating is not tied to an RMS figure, so size the rest of the system with care.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0BRXKHM1BModel: ZE1000.1Category: Amplifiers
Overview
Not a multichannel amp for door speakers, this is a single channel monoblock for subwoofers. A low pass crossover filters out high notes, and a MOSFET power supply drives the output stage.
The reason to look at it is a high stated power with stable operation at low impedance in a flat metal case. The limit is that the listing gives no RMS figure, no included parts and no weight, and the title mixes mono and stereo wording.
Who it's for
A trunk build with one or two subwoofers and enough electrical headroom is the right setup. A stock-radio upgrade with full range speakers needs a multichannel amp instead.
Pros and cons
- Monoblock layout for subwoofers
- Stable into low impedance loads
- Low pass crossover included
- Class D design runs efficiently
- Power not stated as RMS
- Included parts not listed
- Title mixes mono and stereo wording
Performance notes
A monoblock sends all power to one output, so the speaker load and the supply voltage under load decide how much you really get. Low impedance raises current draw, which strains wiring and the battery. The crossover limits the signal to bass frequencies so the sub is not asked to play high notes.
Specifications
| Model | ZE1000.1 |
|---|---|
| Dimensions & fit | |
| Item dimensions | 11 x 6.9 x 2 inches |
| Capacity & performance | |
| Maximum output power | 2000 watts |
| Output power | 2000 watts |
| Power & efficiency | |
| Voltage | 14.4 volts |
| Maximum supply voltage | 16 volts |
| Minimum supply voltage | 14.4 volts |
| Construction & materials | |
| Material type | Metal, silicon |
| Compatibility & installation | |
| Mounting type | Freestanding |
| Other details | |
| Number of channels | 1 |
| Part number | ZE1000.1 |
| Specification met | FCC |
Frequently asked questions
What comes in the box with the AUDIOZERONE ZE1000.1?
The listing does not name any included components such as wiring, a remote or mounting hardware. Confirm with the seller before ordering.
Is the ZE1000.1 a mono or a stereo amplifier?
The channel field says 1, so it is a single channel monoblock, although the title also contains the word stereo. Treat it as a subwoofer amp.
What speaker loads does the ZE1000.1 support?
The title says 1 to 4 ohm stable. A lower load draws more current from the car electrical system.
Will the ZE1000.1 run my door speakers?
It is built as a single channel subwoofer amp with a low pass crossover, so it is not meant for full range door speakers.