CrimsonMark #8 Self-Drilling Drywall Anchor Kit 120 Pcs
- Maximum Shear Strength: 75lbs
- Fastener Type: Drywall Screw
- Thread Size: 1/32 inch
- Fastener Size: No. 8
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A practical drywall anchor kit sized for #8 by 1-1/4 inch hardware and everyday hanging jobs.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0CC1YGYVKModel: CR51Category: Drywall Anchors
Overview
A 120 piece drywall anchor kit from CrimsonMark, model CR51, built around #8 by 1-1/4 inch self drilling anchors rated to hold up to 75 pounds in standard drywall, paired with matching screws and a storage case.
These are self tapping plastic anchors, not toggle style hardware, so they suit picture frames, small shelving and bathroom or kitchen accessories more than anything approaching their full 75 pound rating on a long term basis. The kit ships as 60 anchors and 60 galvanized screws in a clear organizer box.
- 120 pcs: 60 anchors + 60 screws
- #8 x 1-1/4 inch, holds up to 75 lbs
- Self drilling, no pilot hole needed
- Nylon and glass fiber construction
Who it's for
Anyone hanging light to mid weight items on drywall or plaster who wants a full kit on hand rather than buying anchors one size at a time. Not the choice for masonry walls or loads that push toward the upper end of the rating.
Pros and cons
- No pre-drilling needed, drives directly into drywall
- 120 piece kit covers both anchors and matching screws
- Reusable and removable if repositioning is needed
- Comes in an organized storage case
- 75 pound rating is for drywall only, not masonry or plaster board
- Plastic anchor body, not a toggle style fastener for heavier loads
Performance notes
The anchors are self drilling, so a sharp pointed shank lets them go straight into drywall with a screwdriver or screw gun and no pilot hole, which also means less dust than a pre drilled install. Once seated, the ribbed nylon and glass fiber body wedges against the back of the drywall to resist pulling straight out or spinning in place under load.
Specifications
| Brand | CrimsonMark |
|---|---|
| Model | CR51 |
| Dimensions & fit | |
| Thread Size | 1/32 inch |
| Fastener Size | No. 8 |
| Item Weight | 0.72 pounds |
| Item Dimensions | 8.6 × 6.1 × 0.7 inches |
| Size Name | Nylon |
| Construction & materials | |
| Material Type | Nylon |
| Color | White |
| Finish Types | Uncoated |
| Exterior Finish | Plastic |
| Included components | |
| Number of Pieces | 120 |
| Unit Count | 120 |
| Other details | |
| Maximum Shear Strength | 75lbs |
| Fastener Type | Drywall Screw |
| Metal Type | Carbon Steel |
| Drive System | Slotted |
| Screw Head Style | Round |
| Head Type | Round |
| Screw Point Style | Self-Drill Point |
| Thread Type | Self-Drilling |
| Set Screw Thread Type | Unified National Coarse (UNC) |
| Thread Style | Right Hand |
| Thread Class | Standard |
| Number Of Items | 120 |
| Part Number | CR51 |
| Thread Coverage | Fully Threaded |
Closest rivals on specs
Comfrtx Metal Self-Drilling Drywall Anchors Kit 120 Piece- Item Weight 0.72 vs 0.62 pounds (+16%)
Feaoxyo Self-Drilling Drywall Anchors with Screws 100 Piece- Item Weight 0.72 vs 0.55 pounds (+31%)
Frequently asked questions
What size screws does this CrimsonMark kit use?
It's built around #8 by 1-1/4 inch screws and matching anchors.
Do I need to pre-drill a hole first?
No, the anchors are self drilling and go in directly with a screwdriver or screw gun.
How much weight can each anchor hold?
The listing rates each anchor up to 75 pounds in standard drywall.