HOTO Easyflow Hot Glue Gun and Screwdriver Set Bundle
- Auto dispensing switch, no constant trigger squeeze
- 3000mAh battery, up to 28 glue sticks per charge
- Wireless or wired use
- 40 glue sticks included, per the bundle title
- 24-in-1 precision screwdriver set bundled
- S2 steel bits at 60HRC, nickel anti-rust treatment
- Aluminum alloy screwdriver body, bearing in the lid
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A cordless glue gun with light-touch auto dispensing, bundled with a manual precision screwdriver for electronics and small repairs. Wattage and glue stick size are not listed, so check refills before committing.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0CSKCVW3DCategory: Glue Guns
Overview
HOTO Easyflow is a hot glue gun that feeds glue when you press a light switch instead of squeezing a trigger, and it runs on its battery or plugged in. This bundle adds glue sticks and a manual precision screwdriver with interchangeable bits for electronics, glasses and small appliances.
Light-press auto dispensing gives an even glue flow without hand fatigue, and the option to run wired means a flat battery does not stop a project. The screwdriver set is a useful extra for repair benches but adds nothing for someone who only glues. Wattage and stick size go unstated.
Who it's for
Hobbyists who move between glue projects and opening up gadgets, eyeglasses or small appliances get two tools in one order. People who glue occasionally and own a bit set already would be paying for duplicates.
Pros and cons
- Light switch dispensing, no trigger squeezing
- Runs cordless or plugged in
- Many glue sticks per charge
- Wide range of precision bit shapes
- Wattage and glue stick size not listed
- Battery care advice adds a charging rule
- Screwdriver set is extra if you only glue
Performance notes
Auto dispensing pushes glue at a steady rate once the switch is pressed, so bead size depends on how fast you move rather than on trigger pressure. The battery sets how long a cordless session lasts, and wired use removes that limit. Screwdriver bit life comes from the hardened S2 steel and nickel coating, while the bearing in the lid lets one finger hold the cap as the handle turns.
Specifications
| Brand | HOTO |
|---|---|
| Capacity & performance | |
| Battery capacity | 3000 mAh |
| Power & efficiency | |
| Power Source | Battery |
| Construction & materials | |
| Bit material | S2 alloy steel, 60HRC, nickel anti-rust treatment |
| Other details | |
| Bit types | Phillips PH000/PH00/PH0/PH1, Flat SL1.5/SL2.0, Hex H1.5/H2.0/H2.5, Torx T2/T3/T4, Torx With Hole T5H/T6H/T8H/T9H/T10H, U2.6, Y0.6, W1.5, Tri-Wing TW1, Triangular 2.3, Pentagon P2/P5 |
| Screwdriver body | Aluminum alloy, one piece, bearing lid |
| Dispensing | Auto dispensing switch |
| Style Name | Glue Gun & Precision Screwdriver Set |
| Glue sticks per charge | Up to 28 |
Frequently asked questions
How do I extend battery life on the HOTO Easyflow glue gun?
HOTO advises using the gun while charging only when the battery is above 30%, shown by the white power light.
Which bits come with the HOTO precision screwdriver set?
Phillips PH000, PH00, PH0 and PH1, flat SL1.5 and SL2.0, hex H1.5, H2.0 and H2.5, Torx T2 to T4, Torx with hole T5H to T10H, plus U2.6, Y0.6, W1.5, Tri-Wing TW1, triangular 2.3 and pentagon P2 and P5.
Is the HOTO screwdriver in this bundle electric?
No. It is a manual screwdriver with a one-piece aluminum alloy handle and a bearing in the lid for smooth turning.