WORKPRO W123021 Router
- Router
- Battery
- 13.8 ounces
- 3.6 volts
- More reviewed than 62%
A light, cordless 3.6V router built for detail and trim cuts rather than heavy routing.
As an Amazon Associate, ProductDome may earn a commission from qualifying purchases made through links on this page.
How it ranks among the 183 routers we track
4.2★ across 697 Amazon ratings, Bayesian-smoothed toward the category average.
697 Amazon ratings, weighted on a log scale so huge counts don't drown everything.
600+ bought on Amazon last month.
Brand identity, imagery, description and spec coverage.
The ProductDome score is separate from the Amazon rating shown above: it combines the Bayesian-smoothed Amazon rating with evidence volume, tracked demand, and data quality across the 183 routers we track - how the scorecard works · full routers data report. Confidence: high - strong rating volume and complete data.Last refreshed Aug 4, 2026. Data-computed, not a hands-on test. Compiled by the ProductDome Research Team.
Overview
The WORKPRO W123021 is a battery powered router running on a 3.6V pack at up to 17,000 RPM, with a compact body at 0.39 kg. Its low voltage and light weight point to a small handheld tool for trimming and detail work rather than a full size plunge router.
A 3.6V motor is on the small end for a router, closer to what cordless rotary or engraving tools use than a benchtop trim router, so this looks built for light, cordless detail cuts rather than deep or wide routing passes. No seller description or reviews are attached to confirm bit compatibility or base type.
- Battery powered, 3.6V
- 17,000 RPM speed
- 0.39 kg (about 0.86 lb)
- WORKPRO brand
Who it's for
Suits hobbyists doing light edge trimming, engraving or detail cuts where cordless convenience matters more than depth of cut. Not a match for anyone needing to hog out deep dado cuts or run a router table, since the voltage and weight point to a small handheld class of tool.
Strengths and trade-offs
Drawn from this product's published specifications.
- High 17,000 RPM spindle speed
- Cordless and light at 0.39 kg
- Low 3.6V power limits heavy cutting
- No base, bit or accessory detail listed
Performance notes
17,000 RPM is a high spindle speed, which favors clean cuts in soft material and detail bits over brute stock removal. The 3.6V battery and 0.39 kg body keep the tool light in hand but will limit run time and torque compared to a corded or higher voltage router.
Specifications
| Brand | WORKPRO |
|---|---|
| Model | W123021 |
| Power Source | Battery |
| Item Weight | 13.8 ounces |
| Voltage | 3.6 volts |
| Speed | 17000 rpm |
Other WORKPRO routers
How it compares
This product against the closest alternatives we track in routers.
| Product | Amazon rating | Ratings | ProductDome score |
|---|---|---|---|
| WORKPRO W123021 RouterThis product | 4.2 / 5 | 697 | 4.0 / 5 |
| DEWALT DCS356D1 RouterDeWalt | 4.8 / 5 | 17,925 | 4.7 / 5 |
| Dremel 7760-N/10A RouterDremel | 4.6 / 5 | 10,749 | 4.5 / 5 |
| Makita XMT03Z 18V LXT® Lithium-Ion Cordless Multi-ToolMAKITA | 4.8 / 5 | 5,719 | 4.5 / 5 |
| BOSCH 1617EVSPK RouterBosch | 4.8 / 5 | 4,987 | 4.5 / 5 |
Similar routers from other brands
Questions about the WORKPRO W123021
Common buyer questions answered straight from the product spec data - no fluff, no "it depends".
Is the WORKPRO W123021 corded or cordless?
Cordless, running on a 3.6V battery.
What is its top speed?
17,000 RPM.
How much does it weigh?
About 0.39 kilograms, roughly 0.86 pounds.