Wensilon Black Drywall Screws #6 x 3/4 Inch

Overview

A 1-pound box of 366 black #6 x 3/4 inch Phillips drywall screws from Wensilon, coarse-thread with a sharp tail, sized for attaching drywall, thin slate, and light wood pieces.

At 3/4 inch this is one of the shortest drywall screws in this set, which narrows it to thin material rather than anything thick or layered. Wensilon describes the shank as smooth to cut down on slipping while driving, a detail worth noting alongside the coarse thread most of these screws share.

• #6 x 3/4 inch coarse thread
• Sharp tail, no pre-drilling
• Smooth shank reduces slipping
• 366 screws per 1 lb box

Who it's for

Works for small drywall patches, thin slate, or light wood pieces where a short screw is actually what the job needs. Not a fit for thicker board or anything needing more bite past 3/4 inch.

Pros and cons

Performance notes

The coarse thread is cut to lower resistance going in while still biting into the board, and the sharp tail is meant to start the screw without a pilot hole. The smooth shank is described as reducing slip during driving, which matters most with a screw this short since less thread is engaged overall.

Specifications