Makita LS1110F Slide Compound Miter Saw 10 in
- 10 inch blade, 13.0 AMP direct drive motor
- 4,500 RPM
- 12 inch crosscut at 90, 8-1/2 inch at 45 degrees
- Miter 0 to 47 degrees each way, stops at 0, 15, 22.5, 31.6, 45, 47
- Bevel 0 to 47 left, 0 to 2 right
- 36.2 lbs, linear ball bearing slide
- 2-1/2 inch tall fence
Updated 21 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A light, accurate slide miter saw with wide crosscut capacity for trim and deck work. The bevel barely tilts right, and a dust extractor is extra.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0CZNSJMPHModel: LS1110FCategory: Miter Saws
Overview
Crosscutting baseboard, crown and deck boards is the work this Makita slide saw is built for, with a linear ball bearing slide, soft start and an LED that lights the cut line. A dust bag, extension wings and a see-through guard come with it.
Finish carpenters and deck builders get wide slide capacity and a bevel that tilts left and slightly right, in a saw light enough to carry. The bevel range to the right is very small, so right-hand bevels mean flipping the work.
Who it's for
Trim, flooring and cabinet work on job sites suit the slide capacity and light frame. Shops cutting many right-side bevels should look for a full dual-bevel saw.
Pros and cons
- Direct drive motor, less maintenance
- Smooth linear ball bearing slide
- LED lights the cut line
- Tall fence for crown
- Very limited right bevel
- Dust extractor sold separately
- Blade tooth count not listed
Performance notes
Cut accuracy comes from the linear ball bearing slide, which guides the head in a straight line, and from positive miter stops at common angles. The tall fence supports crown and base upright for more vertical cutting capacity.
Specifications
| Brand | Makita |
|---|---|
| Model | LS1110F |
| Dimensions & fit | |
| Blade Length | 10 inches |
| Item Dimensions L X W X H | 22.44 x 31.5 x 17.13 inches |
| Fence height | 2-1/2 inches |
| Item weight | 36.2 pounds |
| Capacity & performance | |
| Speed | 4,500 RPM |
| Capacity | 12 inches at 90 degrees, 8-1/2 inches at 45 degrees |
| Bevel range | 0 to 47 degrees left, 0 to 2 right; stops at 0 and 45 left |
| Power & efficiency | |
| Power Source | Corded electric |
| Voltage | 120 volts |
| Motor Power | 13.0 AMP direct drive, 1572 watts |
| Construction & materials | |
| Blade Material | Tungsten carbide |
| Color | Teal |
| Handle Material | Rubber |
| Included components | |
| Included Components | Dust bag, wrench, attachments |
| Warranty & support | |
| Warranty Type | Limited |
| Other details | |
| Cutting Angle | Miter 0 to 47 degrees left and right; stops at 0, 15, 22.5, 31.6, 45, 47 |
| Other Special Features Of The Product | Soft start, LED light, linear ball bearings, see-through guard, aluminum base, extension wings, dust port |
| Blade Shape | Round |
| Item Type Name | Makita LS1110F 10” Slide Compound Miter Saw |
Frequently asked questions
Can I connect a shop vac to the Makita LS1110F?
Yes. The dust port connects to a dust extractor or vacuum, sold separately, and also takes the included dust bag.
Does the Makita LS1110F come with a blade?
The specs describe a 10 inch tungsten carbide blade; included components list attachments, a bag and a wrench.