ELEGOO PETG Filament 1.75mm 1 kg
- PETG, 1.75 mm, black
- 1 kg spool
- Diameter accuracy +/- 0.02 mm
- Dried and vacuum sealed
- Mechanically wound, inspected to reduce tangles
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A tough, impact resistant filament for printing functional brackets, clamps and printer parts. It needs drying again if left open.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0D41Y3WWZCategory: 3D Printing Filament
Colors Available
Need a different one? Pick on Amazon →
Overview
A garage workbench turning out brackets, clamps and replacement printer parts is where Elegoo PETG belongs. It prints with little warping and bonds layers strongly, giving parts that take knocks without cracking.
Toughness with easy printing is the case for PETG over brittle plastics. It absorbs moisture once opened, so it should be used soon or dried before reuse.
Who it's for
Suited to hobbyists making holders, clamps and mechanical parts. Purely decorative printing is often easier with PLA.
Pros and cons
- High impact resistance
- Minimal warping and shrinkage
- Strong layer adhesion
- Tight diameter tolerance
- Absorbs moisture once open
- Print temperatures not listed
- Single color in this listing
Performance notes
Strength comes from PETG's toughness, which flexes slightly instead of shattering. Steady diameter makes feeding smooth. Moisture causes bubbles and stringing, which is why it ships dried and sealed.
Specifications
| Brand | Elegoo |
|---|---|
| Dimensions & fit | |
| Item Diameter | 1.75 millimeters |
| Diameter tolerance | +/- 0.02 mm |
| Item weight | 1 kg |
| Construction & materials | |
| Material Type | PETG (Polyethylene Terephthalate Glycol) |
| Color | Black |
| Compatibility & installation | |
| Compatible devices | Neptune, Ender, Adventurer, Kobra series and most 1.75 mm FDM printers |
Frequently asked questions
Is Elegoo PETG the same as PLA?
No. Elegoo describes PETG as combining properties of PLA and ABS, with higher durability and impact resistance.
Do I need to dry Elegoo PETG?
It is dried and vacuum sealed before packing. Use it soon after opening and dry it completely before using again.
Will Elegoo PETG fit my Ender printer?
Yes. It is compatible with most 1.75 mm FDM printers, including the Ender series.