Audio-Technica AT-LP70XBT Wireless Turntable
- Fully automatic belt drive, DC motor
- 33-1/3 and 45 RPM speeds
- AT-VM95C cartridge, 0.6 conical stylus
- Bluetooth with aptX Adaptive codec support
- Switchable phono/line preamp built in
- 55 dB signal-to-noise ratio
- VM95 stylus upgrades: elliptical, microlinear, Shibata
- 2-year warranty
Updated 25 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A plug-and-play automatic turntable that streams to Bluetooth speakers or feeds a stereo through its own preamp, with stylus upgrades for later. The plastic chassis and fixed headshell limit deeper tinkering.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0D9KKC2JTModel: AT-LP70XBTCategory: Turntables
Colors Available
Need a different one? Pick on Amazon →
Overview
A belt-driven platter and a fully automatic J-shaped tonearm do the record handling, carrying an Audio-Technica VM95 cartridge across the groove. Sound leaves through a switchable phono or line preamp, or over Bluetooth to wireless speakers and headphones.
Flexibility is why this deck earns shelf space: wired to a stereo with or without a phono input, or wireless to a Bluetooth speaker, from the same box. The cartridge accepts higher grade VM95 styli later, yet there is no detachable headshell and the body is plastic.
Who it's for
Newcomers building a first record setup, with powered speakers or Bluetooth headphones, get a full chain in one unit. Collectors who want to change cartridges or tune the arm should look at a manual deck with a removable headshell.
Pros and cons
- Automatic play, no manual cueing needed
- Streams vinyl to Bluetooth speakers and headphones
- Built-in preamp suits stereos without phono input
- Stylus upgrades within the VM95 range
- No detachable headshell or cartridge
- Two playback speeds only
- Tracking force and counterweight details not listed
Performance notes
Sound quality rests mostly on the cartridge and stylus, and the stock conical stylus can be swapped for elliptical, microlinear or Shibata VM95 styli. The anti-resonance chassis and the off-board AC adapter both reduce noise reaching the signal. Over Bluetooth, the codec your speaker supports sets the ceiling, with aptX Adaptive the higher grade option listed.
Specifications
| Brand | Audio-Technica |
|---|---|
| Model | AT-LP70XBT |
| Dimensions & fit | |
| Item weight | 6.4 pounds |
| Item Dimensions L x W x H | 13 × 15.7 × 4.3 inches |
| Capacity & performance | |
| SignaltoNoise Ratio | 55 db |
| Cycles | DC Motor |
| Power & efficiency | |
| Power Source | Corded Electric |
| Power Consumption | 2 watts |
| Voltage | 12 volts |
| Construction & materials | |
| Enclosure Material | Plastic, Three-Piece Chassis |
| Color | Black/Bronze |
| Compatibility & installation | |
| Connectivity Technology | Bluetooth (aptX Adaptive Supported) |
| Compatible Devices | Headphone, Speaker |
| Warranty & support | |
| Warranty Description | 2 years |
| Other details | |
| Signal Format | Analog |
| Drive type | Belt drive, fully automatic |
| Cartridge | AT-VM95C, 0.6 Conical Stylus |
| Preamp | Built-in switchable phono/line |
Frequently asked questions
Can I swap the cartridge on the AT-LP70XBT?
Not the cartridge body. The AT-VM95C is integrated into the J-shaped tonearm with no detachable headshell. Only the stylus changes, to other VM95 Series styli.
Can the AT-LP70XBT connect to speakers without a phono input?
Yes. The built-in switchable phono preamp lets it connect directly to a home stereo, powered speakers, a computer or another component, whether that component has a dedicated phono input or not.
Does Bluetooth replace the wired output on the AT-LP70XBT?
No. Bluetooth is an added option for speakers and headphones, and the turntable still connects by wire through its built-in preamp.