Rubi TC-125 G2 Circular Saw 5 in
- 125 or 115 mm blades, including reinforced-plate blades
- 1250 W, 120 V, 11300 rpm
- Runs on SLIM SYSTEM G2 rails, guides sold separately (#51949)
- Dry or wet cutting: 32 mm vacuum port, 16 mm hose connection
- Porcelain, ceramic, natural and sintered stone
- TVR-125 SUPERPRO dry blade, case, 2 cut positioners included
- 30.9 lb
Updated 5 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A capable rail-guided cutter for large format porcelain and stone with flexible dry or wet dust control. It requires the separate guide rail kit to work.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0DGV67XY1Model: TC-125 G2Category: Circular Saws
Overview
Not a woodworking circular saw, this Rubi cutter rides on a sliding platform along guide rails to cut porcelain slabs, ceramic tile and stone. It runs dry with a vacuum attached or wet through a regulated water feed, under a die-cast guard with a clear cover.
Rubi built it for large format porcelain, where a rail-guided cutter gives long straight cuts on slabs. It does not work alone: the guide rails, suction cups and clamps are a separate purchase, and the water hose quick coupling is not included.
Who it's for
Tile setters cutting large format porcelain and sintered stone on site get a rail cutter with dust and water management. DIYers expecting a standalone handheld saw will need the separate rail kit before making a single cut.
Pros and cons
- Dry or wet cutting modes
- Accepts reinforced-plate blades
- Dry-cutting blade included
- Clear guard eases blade changes
- Guide rails and clamps sold separately
- Water hose quick coupling not included
- Only usable on its rail system
Performance notes
Cut quality depends on the platform sliding on adjustable radial bearings along the rails, which holds the blade on a straight track. Dust control comes from vacuum extraction during dry cuts or a regulated water flow for wet cuts. The tilting side guard reduces splashes and improves extraction during mitre cuts.
Specifications
| Brand | RUBI |
|---|---|
| Model | TC-125 G2 |
| Dimensions & fit | |
| Blade diameter | 125 or 115 mm |
| Item Dimensions L X W X H | 14.13 x 8.25 x 9.63 inches |
| Item weight | 30.9 lb |
| Capacity & performance | |
| Speed | 11300 rpm |
| Power & efficiency | |
| Voltage | 120 volts |
| Motor Power | 1250 watts |
| Construction & materials | |
| Handle Material | Aluminum |
| Color | Red |
| Blade Material | Tungsten carbide |
| Compatible Material | Porcelain slabs, ceramic tiles, natural and sintered stone |
| Included components | |
| Included Components | TVR-125 SUPERPRO dry blade, carrying case, vacuum adapter (37, 42, 50 mm), 2 cut positioners |
| Required accessories | SLIM SYSTEM G2 slides; ref #51949 guides (2 x 155 cm, 1 x 65 cm), suction cups, clamps |
| Warranty & support | |
| Warranty Type | Limited |
| Other details | |
| Number Of Teeth | 24 |
| Other Special Features Of The Product | Dual dust reduction: dry with vacuum (32 mm), wet with valve and hose (16 mm); adjustable radial bearings; PRCD cable |
Frequently asked questions
What comes with the Rubi TC-125 G2?
The TVR-125 SUPERPRO blade for dry cutting, a carrying case, a vacuum cleaner adapter for 37, 42 and 50 mm hoses and 2 cut positioners. The water hose quick coupling is not included.
Can the Rubi TC-125 G2 be used without rails?
Rubi says it is essential to use it on SLIM SYSTEM G2 slides. Reference #51949 adds the guides (2 x 155 cm and 1 x 65 cm), suction cups and clamps.
Can the Rubi tile cutter cut wood?
The listing describes porcelain slabs, ceramic tiles and natural and sintered stone only.
Does the Rubi TC-125 G2 make mitre cuts?
The tilting side guard is described for mitre cutting, but the listing gives no angle range.