ARCTIC P12 Pro A-RGB
- 3 fans in the pack, 120 mm each
- 600 to 3000 RPM PWM control, 0 RPM below 5% PWM
- 5V digital RGB lighting
- 77 CFM airflow
- 12 volts, 3.96 watts, 4-pin connector
- Fluid dynamic bearing, Y-cable splitter included
- 4.7 x 1 x 4.7 inches per fan
Last refreshed Oct 2, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A trio of PWM fans with addressable RGB and a splitter cable in the box. The listing does not state a warranty.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0DJD8MJ5SModel: P12 ProCategory: Case Fans
Overview
Inside a desktop case, these fans move air through the CPU cooler and radiator while their addressable lighting glows through the frame. Two fans can share one header through the splitter, and the rotor rides on a fluid dynamic bearing.
Wide speed control with a stop mode at low PWM levels lets builders go silent at idle and push airflow under load. The pack covers a typical case in one order. The limitation is that the lighting needs a separate digital RGB header, and a warranty period is not given.
Who it's for
Enthusiast builds with a glass panel and a lighting scheme can wire the trio together and run them quietly at idle. Buyers with only a standard non-addressable RGB header, or those who want unlit fans, should check the listed lighting type first.
Pros and cons
- Zero-RPM stop at low PWM
- Wide PWM speed range
- Addressable RGB lighting
- Y-cable splitter included
- Warranty period not listed
- Needs a digital RGB header
Performance notes
The fans stop at very low PWM duty and ramp up through a broad range, so noise and airflow follow the motherboard curve. The airflow figure is a free-air measure, and restrictive filters or radiators lower real delivery. Smooth bearing action matters most at low speed, where bearing noise is easiest to hear.
Specifications
| Brand | ARCTIC |
|---|---|
| Model | P12 Pro |
| Dimensions & fit | |
| Fan size | 120 mm |
| Item dimensions L x W x H | 4.7 x 1 x 4.7 inches |
| Capacity & performance | |
| Air flow capacity | 77 cfm |
| Maximum rotational speed | 600 to 3000 RPM, 0 RPM below 5% PWM |
| Wattage | 3.96 watts |
| Power & efficiency | |
| Power connector type | 4-Pin PWM |
| Voltage | 12 volts |
| Construction & materials | |
| Material type | Plastic |
| Color | Black |
| Compatibility & installation | |
| Compatible devices | Desktop |
| Included components | |
| Number of packs | 3 |
| Other details | |
| Lighting | 5V digital RGB |
| Included | 3 fans, Y-cable splitter |
| Bearing type | Fluid dynamic bearing |
Frequently asked questions
Is the ARCTIC P12 Pro A-RGB a 12 volt RGB fan?
No. The fan motor runs on 12 volts, but the lighting is 5V digital RGB, so it needs a matching digital header rather than a standard 12 volt RGB one.
Do the fans stop spinning?
Yes at very low PWM. The title says 0 RPM below 5% PWM.
What does the Y-cable splitter do?
It lets two fans share one connection. The listing says it comes with the pack.
How many fans are in the pack?
Three, per the title and the unit count.