KF CPTEC KF-8601 PEX Crimping Tool 1/2 and 3/4"
- Size: 1/2 Inch, 3/4 Inch
- Grip Type: Ergonomic
- Handle Type: Ergonomic
- Handle Material: Alloy Steel
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A straightforward two-size hand cutter with an alloy steel handle, worth it if the 1/2 inch and 3/4 inch capacities match the stock you are cutting.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0DK3BDSBJModel: KF-8601Category: Crimpers & Wire Strippers
Overview
A hand-operated cutter with an alloy steel handle, the KF-8601 covers two cut sizes, up to 1/2 inch and up to 3/4 inch depending on the jaw used. At 1.41 kilograms it carries enough heft for leverage without becoming an overhead-only tool.
Category listings for this item are labeled simply Cutters, and the spec sheet gives no material rating beyond the alloy steel handle, so the safest read is a general-purpose rod or bolt cutter rather than anything specialty. Confirm exact stock diameter and hardness against the listing photos before ordering.
- Alloy steel handle
- 1.41 kilogram total weight
- 1/2 inch and 3/4 inch size capacity
- Model KF-8601
Who it's for
Suits anyone who needs a compact cutter for rod, bolt, or similar round stock up to 3/4 inch and wants one tool that covers two common sizes. Not the choice for anyone needing a cutter rated for hardened material or a specific pipe standard, since that is not specified here.
Pros and cons
- Covers two common cut sizes in one tool
- Alloy steel handle adds cutting leverage
- No material or hardness rating given
- Exact stock type it is built for is not specified
Performance notes
The alloy steel handle is the main mechanical advantage here, giving the leverage that lets a hand tool cut through solid stock instead of just gripping it. The listed weight of 1.41 kilograms sits in the range where a tool stays useful with one hand but still has mass behind the jaw.
Specifications
| Brand | KF CPTEC |
|---|---|
| Model | KF-8601 |
| Dimensions & fit | |
| Size | 1/2 Inch, 3/4 Inch |
| Item Weight | 3.11 poundshigher than 90% of 32 crimpers & wire strippers |
| Item Dimensions L X W | 15.7 × 5.5 inches |
| Construction & materials | |
| Handle Material | Alloy Steel |
| Color | Orange |
| Included components | |
| Included Components | Go/No-Go Gauge × 1, PEX Crimping Tool × 1 |
| Other details | |
| Grip Type | Ergonomic |
| Handle Type | Ergonomic |
| Specific Uses For Product | new plumbing installations, plumbing repairs |
| Set Name | 1/2 And 3/4-inch |
| Specification Met | ASTM F1807 |
Closest rivals on specs
Frequently asked questions
What sizes does the KF KF-8601 cutter handle?
The listing specifies 1/2 inch and 3/4 inch capacities.
What is the KF-8601 handle made of?
Alloy steel.
How much does the KF-8601 weigh?
1.41 kilograms.