SEQURE HT140 2-in-1 Hot Tweezers Soldering Iron Kit
- 122 to 932 F (50 to 500 C) temperature range
- 140 W max power, 5 to 28 V input
- 2 second heat-up on cartridge tips
- Type-C and DC5525 input, PD and QC supported
- 3 preset temperatures plus turbo boost
- Sleep after 60 s of inactivity
- C210 iron tips and C120 tweezer tips compatible
- PD 65W adapter and 2 tweezer tips included
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A compact iron and hot tweezers in one tool for SMD rework and small electronics repair, powered from USB-C or a battery. The bundled adapter is lower than the tool's peak power, so full output needs a stronger supply.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0DMSTGQWNModel: HT140Category: Soldering Irons
Overview
Not a bench station with a base unit and cable, this is a pen-size soldering iron that also works as hot tweezers for lifting surface-mount parts. It heats cartridge tips from USB-C or a barrel jack, with an OLED screen for temperature.
Switching between iron and tweezers in one handpiece saves swapping tools during SMD work. The included adapter supplies less than the iron can draw, so the turbo mode and the fastest heat-up need a higher-rated PD charger or battery.
Who it's for
Repair techs and hobbyists working on small boards get iron and tweezer modes in a portable body. Those soldering thick cables or large ground planes need a bench station with more thermal mass.
Pros and cons
- Iron and hot tweezers in one tool
- Runs from PD chargers, power banks, lipo packs
- OLED display with temperature calibration
- Auto sleep reduces tip wear
- Bundled adapter below the tool's peak power
- Includes an EU converter, US plug unclear
- Iron tip count in the box not listed
- Small tips limit heavy joints
Performance notes
Heat-up speed and stability come from the cartridge tips with built-in heaters and the temperature control loop. Delivered power depends on the supply, so a low-rated charger slows recovery on larger joints while a stronger PD source unlocks full output.
Specifications
| Brand | SEQURE |
|---|---|
| Model | HT140 |
| Dimensions & fit | |
| Item Length | 6.3 inches |
| Item weight | 1.76 ounces |
| Capacity & performance | |
| Upper Temperature Rating | 932 F |
| Heating Element | Ceramic |
| Wattage | 140 watts max |
| Temperature range | 122 to 932 F (50 to 500 C) |
| Power & efficiency | |
| Input Voltage | 5 to 28 V DC |
| Power input | Type-C and DC5525, PD3.1/3.0/2.0, QC3.0/2.0 |
| Power Source | Corded Electric |
| Construction & materials | |
| Handle Material | Stainless steel |
| Compatibility & installation | |
| Compatible tips | C210 iron tips, C120 tweezer tips |
| Included components | |
| Included Components | HT station, HT140 host, 2 hot tweezers desoldering tips, 1.8m GND wire set, PD 65W adapter, EU power converter, wire |
| Other details | |
| Additional Features | OLED display, 3 presets, turbo boost, auto sleep after 60 s, temperature calibration |
| Style Name | 2-in-1 soldering iron and hot tweezers |
| Heat up time | 2 seconds |
| Head Style | Screwdriver |
| Specific Uses For Product | Electronic Repair Kit, Precision Soldering Project, Residential Use, SMD Work |
Frequently asked questions
Can the SEQURE HT140 run from a battery?
Yes. It accepts 5 to 28 V through Type-C or DC5525, including 3S-6S lipo batteries, PD chargers and power banks.
Is the SEQURE HT140 a hot air station?
No. It is a soldering iron that converts to heated tweezers for gripping and removing SMD parts. It does not blow hot air.
Which tips does it accept?
C210 soldering tips and C120 hot tweezers cartridge tips.
Does it turn itself off when idle?
It enters sleep mode after 60s of inactivity to reduce tip wear.