Forging Mount HY9458-B Full Motion Wall Mount
- Fits 60 to 110 in TVs VESA up to 900x600mm
- Holds up to 275 lbs dual arm steel construction
- Extends 42.9 in from the wall retracts to 2.8 in
- 180 degree swivel 12 deg down to 5 deg up tilt
- Mounts to 12, 16, or 24 in studs or concrete and brick
- Not for drywall alone needs studs or masonry
- 10 year warranty alloy steel frame
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
Built for oversized screens and long reach out of corners or fireplace walls, this mount only earns its keep if the wall behind the drywall has studs or masonry to grab.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0DNZ8W6X4Model: HY9458Category: TV Mounts
Overview
A dual steel arm swings this television out from the wall for corner placement, then folds flat again once the room returns to normal use. It swivels and tilts to aim the screen at a seating area off to one side. It anchors through the drywall into the framing or masonry behind it, never the drywall alone.
Reach is the selling point: the arm pulls far enough out of a corner or a deep fireplace surround to still angle toward the couch. Getting there costs some installation effort, since it only anchors into real wall structure, so a stud finder and masonry anchors are part of the job. Anyone renting an apartment with drywall-only walls should look elsewhere.
Who it's for
Corner installs, fireplace walls, and media rooms where the screen has to angle toward an off center couch are where this mount earns its price. A bedroom TV that just needs a fixed, flat position does not need this much hardware. Skip it entirely without exposed studs or solid masonry behind the drywall.
Pros and cons
- Reaches out far enough for corner placement
- Retracts nearly flat when not in use
- Full swivel, tilt, and post install leveling
- Built for heavy, extra large screens
- Requires studs or masonry, not drywall alone
- Stud spacing is fixed, not universal
- No cable management feature mentioned
Performance notes
Strength depends on what is behind the drywall, since the arm concentrates the screen's weight at a handful of bolt points rather than spreading it across a wide plate. Swivel and tilt let the bracket compensate for a television mounted off to the side of the seating area, angling the picture instead of rearranging furniture. Reaching the arm to its full extension shifts more leverage onto those bolt points, so wall strength matters most exactly when the arm is stretched out.
Specifications
| Brand | Forging Mount |
|---|---|
| Model | HY9458 |
| Brand Tech | FORGING MOUNT |
| Color | Black |
Frequently asked questions
What size TVs does the Forging Mount HY9458-B fit?
The manufacturer lists a range of 60 to 110 inch screens with a VESA pattern up to 900x600mm, so check your TV's VESA spec before ordering.
Can the Forging Mount HY9458-B go on drywall?
No. It needs to reach wood studs spaced 12, 16, or 24 inches apart, or solid concrete or brick behind the wall. Drywall alone will not hold it.
How far does the HY9458-B extend from the wall?
It extends about 43 inches out and retracts back to under 3 inches, which is why it suits corner and fireplace installs.
Does the Forging Mount come with installation hardware?
Yes, it ships with a mounting template and all hardware for a standard stud or masonry install.
Does the HY9458-B tilt and swivel after it is installed?
Yes. It swivels a full 180 degrees and tilts between 12 degrees down and 5 degrees up, with a small leveling adjustment once it is on the wall.