monTEK HW1242BK-V3 Full Motion Wall Mount
- Fits 43 to 95 in TVs VESA up to 800x400mm
- Holds up to 150 lbs passed 4x capacity testing
- Extends 22 in from the wall retracts to 2.6 in
- Swivels 60 degrees each way tool free tilt
- Tilts 10 deg down to 5 deg up plus leveling
- Fits 16 or 18 in studs or concrete and brick
- 10 year warranty cold rolled steel frame
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A detachable mounting plate turns a normally two person install into a one person job on this large screen mount, though studs or masonry are still required behind the wall.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0DWZRRGR1Model: HW1242-V3Category: TV Mounts
Overview
Two arms pull this television away from the wall and swing it toward a seating area anywhere in the room, built around a plate that separates from the arm assembly. Installers secure the plate to the wall first and attach the screen after, rather than holding it up during drilling.
The detachable plate is the standout feature, letting one person hang the wall half of the mount, then simply clip the TV on afterward instead of holding a heavy screen in place while drilling. The tradeoff is the same one every large wall mount carries: solid studs or masonry are required, not drywall alone. Reach and swivel are generous enough for corner rooms and wide, offset seating.
Who it's for
Living rooms with wide or offset seating, where the screen needs to swivel to face a couch that is not centered on the wall, get the most from this mount. A small bedroom television does not need this much hardware. Anyone installing alone also benefits from the detachable plate more than someone hiring a professional would.
Pros and cons
- Detachable plate simplifies a solo install
- Wide swivel range faces offset seating
- Tool free tilt adjustment
- Long reach suits corners and wide rooms
- Needs studs or masonry, not drywall alone
- Fixed stud spacing options
- Listing does not mention cable routing
Performance notes
Splitting the plate from the arms changes the order of installation rather than the finished strength, since once both halves join, load still passes through the wall plate into the studs behind it exactly as with any dual arm bracket. Swivel comes from pivot points in the arms rather than the wall plate, so the fixed half stays still while the screen end sweeps through its arc. Tool free tilt holds its position through friction and detents at the joint, which is why no wrench is needed once it is set.
Specifications
| Brand | monTEK |
|---|---|
| Model | HW1242-V3 |
| Weight | 18.5 pounds |
| Brand Tech | MonTEK |
| Color | Black |
Frequently asked questions
What size TVs fit the monTEK HW1242BK-V3?
It is rated for 43 to 95 inch TVs with VESA patterns from 200x200mm to 800x400mm.
Does the monTEK mount work on drywall?
No. It needs 16 or 18 inch wood studs, or solid concrete or brick, behind the wall.
What does the detachable plate on the HW1242BK-V3 do?
It lets you screw the wall plate in place first, then attach the TV to it afterward, instead of holding the screen up while drilling.
How far does this monTEK mount extend from the wall?
It reaches about 22 inches out and folds back to roughly 2.6 inches.
How much weight does the HW1242BK-V3 hold?
The manufacturer rates it for up to 150 lbs, tested at 4 times that capacity.