Perlegear PGCM10W-US Electric Ceiling TV Mount
- Fits 32 to 70 inch TVs, VESA 200x100 to 600x400mm.
- Holds up to 88 lbs on a cold-rolled steel frame.
- 150W motor extends in about 32 seconds, rated for 20,000 cycles.
- Flips down 0 to 75 degrees by remote, with 2 degree post-install leveling.
- Ceiling mount only, flat roofs, not sloped; installs on wood joists or concrete.
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A flip-down ceiling mount for rooms where a wall will not work, such as over a bed or patio, holding TVs up to 70 inches and 88 lbs. It will not work on a sloped or vaulted ceiling.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0DZCQV4PRModel: PGCM10Category: TV Mounts
Overview
This is a motorized ceiling mount that lowers a TV from a flat ceiling on a remote-controlled swing arm, rather than a wall or floor bracket. The arm extends down, locks into a viewing angle, then retracts flush against the ceiling when idle, for rooms where a wall or floor mount will not work.
The appeal here is placement freedom: a flip-down ceiling mount works where studs are only overhead, like a covered patio or a bedroom with a footboard in the way. The tradeoff is a hard ceiling-type limit, since this only installs on a flat, structurally solid ceiling, so a vaulted or sloped roofline needs a different mount entirely.
Who it's for
This suits anyone hanging a TV where wall space is not an option, such as a covered outdoor patio, a garage workshop, or a bedroom footboard wall. It is not for anyone with a sloped, vaulted, or drywall-only ceiling, since the mount needs a flat surface anchored to joists or concrete.
Pros and cons
- Flip-down design works where wall mounts cannot
- Fast, quiet motorized extension and retraction
- Remote adjusts viewing angle without a ladder
- Fine leveling adjustment after installation
- Ceiling-only design; will not fit sloped roofs
- Remote requires 2 AAA batteries, not included
- No stated cable management on the arm
- Drop-down reach in inches is not listed
Performance notes
The motor drives the swing arm down and back on command, so lowering or retracting the screen is a powered motion rather than a manual pull. The flip-down range lets the TV angle toward seating below it, and a post-install leveling adjustment corrects for a ceiling that is not perfectly flat once the mount is bolted in.
Specifications
| Brand | Perlegear |
|---|---|
| Model | PGCM10 |
| Dimensions & fit | |
| Minimumsupported Screen Size | 32 inches |
| Maximumsupported Screen Size | 70 inches |
| Construction & materials | |
| Color | White |
| Enclosure Material | Alloy Steel |
| Compatibility & installation | |
| Mounting Type | Ceiling Mount |
| Compatible Devices | Television |
| Included components | |
| Unit Count | 1 |
| Number Of Packs | 1 |
| Warranty & support | |
| Warranty Description | 1 year |
| Other details | |
| Movement Type | Swivel |
| Number Of Items | 1 |
| Maximum Tilt Angle | 8 degrees |
Frequently asked questions
Will the Perlegear PGCM10W-US work on a sloped or vaulted ceiling?
No. This ceiling mount only installs on a flat ceiling anchored to wood joists or concrete; it is not designed for sloped or vaulted roof lines.
What is the maximum TV size and weight for this ceiling mount?
It fits 32 to 70 inch flat or curved TVs up to 88 lbs, with VESA patterns from 200x100 to 600x400mm.
Does the Perlegear ceiling mount come with batteries for the remote?
No. The remote takes 2 AAA batteries, which are not included.
How far down does the TV drop from the ceiling?
The listing states a flip-down range of 0 to 75 degrees rather than a fixed drop distance in inches, so the reach depends on the angle chosen.
Can the mount be adjusted after installation?
Yes. It has plus or minus 2 degree leveling to fine-tune the TV once mounted, plus remote-controlled flip-down angle adjustment.