monTEK HW1277BK Full Motion TV Wall Mount
- Fits 60 to 120 inch TVs up to 265 lbs, VESA 200x200 to 900x600mm.
- Extends up to 27.7 inches, retracts to 2.95 inches off the wall.
- Swivels 60 degrees each way; tilts +5 to -15 degrees tool-free.
- Passed 4x load-bearing testing on a reinforced dual-arm frame.
- Mounts to wood studs, concrete, or brick, stud spacing 12 to 24 inches.
- Preassembled with quick lock and release for faster TV attach or removal.
- Recommended as a 2-person install due to the mount's own weight.
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
Built for genuinely large screens, this mount fits 60 to 120 inch TVs up to 265 lbs with load testing behind the rating, plus tilt and swivel. Installing it is a two-person job given the mount's own weight and the TVs it is meant to carry.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0F4RCHRFZModel: HW1277Category: TV Mounts
Overview
This is a full-motion wall mount built specifically for extra-large televisions rather than a standard living-room set. A reinforced dual-arm frame pulls the TV out from the wall, swivels it side to side, and tilts it without tools, then folds back to a low profile against the wall when not extended.
The main reason to choose this over a lighter-duty mount is scale: it is built and load-tested for TVs most mounts cannot safely carry, with hardware to match. The tradeoff is the mount's own bulk and weight, which the listing itself flags as a two-person installation rather than a solo job.
Who it's for
This is built for home theaters, large living rooms, or commercial spaces running an extra-large display that needs to swivel and tilt. It is not the right mount for a modest TV or for anyone who needs a lightweight, one-person install.
Pros and cons
- Rated and load-tested for extra-large TVs
- Full tilt and swivel, tool-free adjustment
- Fits wood studs, concrete, or brick
- Preassembled with quick lock and release
- Heavy mount; installation recommended for two people
- Not sized for small or midsize TVs
- No cable management feature mentioned
Performance notes
Dual arms share the load as the mount extends out and swivels, which is what lets it carry oversized screens without sagging at full reach. Tool-free tilt adjustment means the viewing angle can be corrected after the TV is already hung, without pulling it back down to reach a bolt or lever.
Specifications
| Brand | monTEK |
|---|---|
| Model | HW1277 |
| Weight | 34.6 pounds |
| Brand Tech | MonTEK |
| Color | Black |
Frequently asked questions
What is the largest TV the monTEK HW1277BK can hold?
It is rated for TVs from 60 to 120 inches and up to 265 lbs, with VESA patterns up to 900x600mm.
Do I need two people to install this mount?
The manufacturer recommends a two-person installation because of the mount's own weight and the size of TV it carries.
Can this mount go on a brick or concrete wall?
Yes. It is built to anchor to wood studs at 12 to 24 inch spacing, concrete, or brick.
Is the tilt adjustment tool-free?
Yes. Tilt runs from plus 5 to minus 15 degrees and adjusts without tools; swivel moves 60 degrees each way.
Will this mount fit a smaller TV, like 50 inches?
No. The listed range starts at 60 inches, so it is not designed for smaller screens.