Xinlei 40 Inch Long Arm Full Motion TV Wall Mount
- Fits 32 to 84 inch TVs VESA 200x100mm up to 600x400mm
- Extends 40 inches arm pulls out to 39.37 in and retracts to 2.99 in from the wall
- Holds up to 132 lbs steel arm with a reinforced pivot shaft
- Tilts and swivels +5 to -10 degrees tilt, plus or minus 90 degrees swivel
- Needs a 16 inch stud, concrete, or brick not rated for drywall alone
- Hardware included mounting kit and instructions in the box
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
This long arm mount suits corner installs and wide viewing angles on studs, concrete, or brick, but it is not rated for drywall alone, so confirm your wall type before buying.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0F62N11VRModel: MA1076LCategory: TV Mounts
Overview
A three-section arm gives this wall mount its reach, letting a TV sit tucked flat against the wall or swing out for an angled view in a corner or beside a fireplace. It works by unfolding at hinged joints rather than sliding on a track, then locking at the chosen angle.
Reach is what a corner or fireplace-offset TV needs, and this mount's extending arm delivers it, swinging the screen out to face the room instead of the wall. That flexibility only works with solid backing, though, since the mount rules out drywall alone.
Who it's for
A corner, a fireplace offset, or any spot where the seating area sits off to one side is where this arm earns its keep, swinging the screen into view instead of leaving it facing the wrong way. Renters and drywall-only walls should look elsewhere, since the bracket needs a stud, concrete, or brick behind it.
Pros and cons
- Extends far out from the wall for reach
- Swivels widely for flexible viewing angles
- Tilts down to cut glare
- Rated for heavier TVs than average
- Not rated for drywall alone, needs stud or masonry
- Limited to a narrower stud spacing than some mounts
- No cable management channel mentioned
- VESA pattern caps below the largest TVs
Performance notes
A three-section arm is what lets the screen reach out and swing into view, folding flat against the wall when retracted and unfolding for an angled look from off to the side. Weight capacity comes from the steel construction and a widened pivot shaft, which is usually the first part to wear out on cheaper long-arm mounts.
Specifications
| Brand | Xinlei |
|---|---|
| Model | MA1076L |
| Dimensions & fit | |
| Minimumsupported Screen Size | 32 inches |
| Maximumsupported Screen Size | 84 inches |
| Construction & materials | |
| Color | Black |
| Enclosure Material | Metal |
| Compatibility & installation | |
| Mounting Type | Wall Mount |
| Compatible Devices | Television |
| Included components | |
| Unit Count | 1 |
| Other details | |
| Movement Type | Swivel |
| Number Of Items | 1 |
| Mfr Part Number | MA1076L(XL) |
Frequently asked questions
Will the Xinlei MA1076L mount work on drywall?
No. It needs to reach a 16 inch wood stud, concrete, or brick behind the wall; the maker says not to use drywall alone.
How far does the Xinlei long arm mount extend?
It pulls out to 39.37 inches and folds back to 2.99 inches, so it can sit nearly flat or reach well into the room.
What is the maximum TV weight for this mount?
Up to 132 lbs (60 kg), within the 32 to 84 inch and VESA 600x400mm size range.
Does the Xinlei mount tilt and swivel?
Yes, it tilts +5 to -10 degrees and swivels about 90 degrees in each direction.