LaserPecker LP4 Dual Laser Engraver
- 10W diode plus 2W IR dual laser
- 0.003mm detail, 8K resolution
- 160 x 120 mm working area
- Galvo scanning, up to 2000 mm/s per bullets
- Cuts 8mm wood, 5mm dark acrylic
- 300+ materials incl. metal and stainless steel
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A fast, precise dual-laser engraver for jewelry, metal and fine detail work. The work area is small, and the speed is listed two ways.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FFB8C7J5Model: LP4Category: Engraving Machines & Tools
Sizes Available
Need a different one? Pick on Amazon →
Overview
Switching between a diode and an infrared source on the touchscreen lets the LaserPecker mark both organic materials and bare metal. Galvanometer mirrors steer the beam at high speed for fine, photo-like detail on jewelry, leather and wood.
Bare-metal marking plus wood cutting in one portable unit covers a wide range of products. The small work area limits large pieces, and the title and bullets give different speeds.
Who it's for
Jewelry makers and personalization sellers will use both lasers. Sign makers needing big panels should choose a gantry machine.
Pros and cons
- Two laser sources
- Marks bare metal
- Very fine detail
- Fast galvo scanning
- Small work area
- Speed listed two ways
- Enclosure not mentioned
Performance notes
Galvo mirrors move the beam instead of moving the head, which is why it engraves so fast. The IR source couples with metal while the diode suits wood and dark materials.
Specifications
| Brand | LaserPecker |
|---|---|
| Model | LP4 |
| Dimensions & fit | |
| Item weight | 16.29 pounds |
| Capacity & performance | |
| Max speed | 2000 mm/s per bullets, 4000mm/s per title |
| Power & efficiency | |
| Laser power | 10 watts |
| Construction & materials | |
| Materials | 300+ incl. metal, stainless steel, glass, leather, ceramics |
| Other details | |
| Work area | 160 x 120 mm |
| Software | LaserPecker Design Space, LightBurn |
| Cutting | Wood up to 8mm, dark acrylic up to 5mm |
| Control | HD LED Touchscreen |
| Precision | 0.003mm, 8K resolution |
Frequently asked questions
Can the LaserPecker LP4 engrave stainless steel?
Yes. Stainless steel and other metals are among the listed materials, using the IR source.
How do I switch lasers on the LaserPecker?
Use the touchscreen to switch between laser sources.
How fast is it?
The bullets say up to 2000 mm/s while the title says 4000mm/s.