Hoteche P805219A Compound Miter Saw 7-1/4 in
- Blade Length: 7.5 inches
- Cutting Angle: 45 degrees
- Surface Recommendation: Aluminum
- Wattage: 900 watts
Last refreshed Jun 24, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A capable small-shop miter saw for trim and narrow board work at a low price, held back by inconsistent instructions and at least one report of a short-shipped box.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FJ7Y43QSModel: P805219ACategory: Miter Saws
Overview
Hoteche's P805219A packs a 7-1/4 inch single bevel compound miter saw into a 7.5A motor with a built-in laser cutline guide, sized for trim, picture frames, and narrow boards rather than full dimensional lumber.
- 7-1/4 inch single bevel compound miter saw
- 7.5A motor at 5000 RPM
- Laser guided cutline
- Preset miter stops at 0/15/22.5/30/45 degrees
Who it's for
Fits homeowners and hobbyists doing trim, molding, and small-stock projects who want laser-guided accuracy without paying for a full-size saw. Not for anyone cutting large beams, thick decking, or dimensional lumber regularly, since cut capacity tops out at 120mm width.
Pros and cons
- Laser guide lines up cuts accurately on narrow stock
- Square, repeatable cuts reported straight out of the box
- Comes with extension bars, dust bag, and spare brushes
- Maxes out near 120mm, too small for 6x6 beams
- Arbor bolt threads reversed, trips up first blade change
- One buyer's box arrived missing the dust collector
Performance notes
The 7.5A copper motor spins the blade at 5000 RPM, enough torque for hardwood, PVC trim, and aluminum molding without bogging down according to owners cutting 1x2 strips and window casing. Crosscut capacity runs 120mm x 45mm at 90 degrees, dropping to 85mm x 45mm on a 45 degree bevel and 120mm x 22mm on a compound miter, so the ceiling is narrow stock rather than framing lumber. Preset stops at 0, 15, 22.5, 30 and 45 degrees speed up repeat angle cuts for frames and trim runs.
Specifications
| Brand | Hoteche |
|---|---|
| Model | P805219A |
| Dimensions & fit | |
| Blade Length | 7.5 inches |
| Item Dimensions L X W X H | 1 × 1 × 1 inches |
| Capacity & performance | |
| Speed | 5500 RPM |
| Power & efficiency | |
| Wattage | 900 watts |
| Power Source | Corded Electric |
| Voltage | 120 volts |
| Construction & materials | |
| Blade Material | High Speed Steel |
| Handle Material | Plastic |
| Color | Yellow |
| Included components | |
| Unit Count | 1 |
| Included Components | 1pair Carbon Brush, 1pair Of Extension Bar, 1pc Dust Bag, 2pcs Hex Wrench |
| Warranty & support | |
| Warranty Type | Extended |
| Other details | |
| Cutting Angle | 45 degrees |
| Surface Recommendation | Aluminum |
| Number Of Teeth | 24 |
| Current Rating | 7.5 Amps |
| Blade Shape | Round |
| Other Special Features Of The Product | Bevel Capability |
Frequently asked questions
What size boards can the Hoteche P805219A cut?
At 90 degrees it crosscuts up to 120mm (about 4-3/4 inches) wide by 45mm thick, dropping to 85mm x 45mm on a 45 degree bevel and 120mm x 22mm on a compound miter.
Does the Hoteche miter saw include a blade and accessories?
Yes, it ships with a blade, a pair of extension bars, two hex wrenches, a dust bag, and a spare pair of carbon brushes.