ATOMSTACK Swift Laser Engraver 7W
- 300 x 300mm work area, 300 x 800mm with Y-axis kit
- 7000mW laser, Class 4
- 4mm basswood plywood in one pass, 6mm in several
- 10,000 mm/min speed, 0.08mm accuracy
- Flame alarm and tilt stop past 15 degrees
- 2.8kg, 460 x 420 x 130mm
Updated 5 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A light, quick to assemble open frame laser for beginners who mostly engrave and cut thin plywood. Power is modest, so thicker cuts take several passes and the frame is open to the room.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FN3YSLKRModel: Swift 7WCategory: Engraving Machines & Tools
Colors Available
Need a different one? Pick on Amazon →
Overview
A beginner who wants to be engraving within minutes of unboxing gets a modular open frame laser in the Atomstack Swift, focused with a simple knob. It runs from LightBurn, LaserGRBL, AtomStack Studio on a computer or the AtomStack phone app.
Fast assembly, a filter cover that allows viewing without goggles, and a flame alarm make it approachable for first time users. Cutting power is limited to thin plywood, and the open frame still needs ventilation.
Who it's for
Hobbyists starting out with ornaments, coasters and small decor will get a simple setup and a fair sized bed. Makers who cut thick stock every week will outgrow the module quickly.
Pros and cons
- Assembles in minutes
- Flame alarm stops the job
- Tilt detection shuts it down
- Filter cover allows viewing
- Thin cutting capacity per pass
- Open frame needs ventilation
- Manual focus knob, no autofocus
- Warranty not listed
Performance notes
Engraving detail comes from the accuracy of the motion system and focus set by the knob. Cut depth is limited by module power, so thicker plywood needs repeat passes at slower speed. Safety sensors watch for flame and tilt and stop the job when either trips.
Specifications
| Brand | Atomstack |
|---|---|
| Model | Swift 7W |
| Dimensions & fit | |
| Item weight | 2.8kg |
| Product dimensions | 460 x 420 x 130mm |
| Capacity & performance | |
| Maximum speed | 10,000 mm/min |
| Power & efficiency | |
| Laser power | 7000mW |
| Construction & materials | |
| Compatible materials | Over 200 materials |
| Material limits | 4mm basswood plywood single pass, 6mm multi pass |
| Included components | |
| Optional accessories | Y-axis extension kit |
| Other details | |
| Laser class | Class 4 |
| Working area | 300 x 300mm (300 x 800mm with Y-axis extension kit) |
| Software | AtomStack Studio, LightBurn, LaserGRBL, AtomStack app |
| Positioning accuracy | 0.08mm |
| Safety features | Axis limit switches, laser filter cover, flame alarm, tilt detection over 15 degrees |
| Assembly Instructions Description | Modular, about 5 minutes |
Frequently asked questions
How long does the Atomstack Swift take to set up?
The modular design allows full assembly within about 5 minutes after unboxing, and focus is set with a knob.
Do I need goggles with the Atomstack Swift?
The listing says the laser filter cover lets you watch the job without wearing goggles.
Can the Atomstack Swift engrave larger items?
With the optional Y-axis extension kit the area grows to 300 x 800mm, enough for frames, guitars and skateboards.
Can I control the Atomstack Swift from my phone?
Yes, through the free AtomStack app.