J-Tech Digital JTECH-VMM-KIT22 TV Mount
- Mounts a 2x2 video wall of 4 screens 37 to 65 inches each
- VESA 100x100 up to 600x400mm per screen bracket
- Holds up to 616 lbs total 154 lbs per screen on concrete, 110 on wood studs
- Pop-out arms reach ports and cabling without removing the tv
- Swivel plus 3 to minus 3 degrees and tilt 0 to minus 1.5 degrees per screen
- Includes 5 wall plates and 4 VESA brackets for the full 2x2 array
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
This kit is built for a dedicated four-screen video wall arranged 2x2, with pop-out arms for maintenance access; it demands stud or concrete mounting strength and is overkill for a single television.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FN9NFQLYModel: JTECH-VMM-KIT22Category: TV Mounts
Overview
Four VESA brackets riding on wall rails make up this kit, built to hold a two-by-two grid of screens rather than a single television. Each bracket slides forward on its rail so the back of that panel stays reachable after installation, and the whole array runs in portrait or landscape.
The reason to choose this kit is the pop-out rail design, which lets an installer reach cabling and ports on any of the four screens without unbolting the whole wall. The limitation is scale: this only makes sense for a genuine multi-screen video wall, and the load rating depends heavily on whether it lands on concrete or wood studs.
Who it's for
A home theater, retail display, or office lobby that wants one continuous four-screen image, rather than four separate mounts, is the target here. It is not a fit for a single living-room tv or for a wall that is not concrete or stud-backed, since the load rating assumes one of those two surfaces.
Pros and cons
- Fits a full four-screen 2x2 video wall
- Pop-out arms reach ports after install
- Swivel and tilt on every screen bracket
- Portrait or landscape orientation supported
- Per-screen capacity drops on wood studs
- Overbuilt and costly for a single tv
- No mention of drywall-only installation support
Performance notes
Load capacity is governed by the wall surface as much as the bracket itself, which is why the kit is rated for more total weight on concrete than on wood studs. The pop-out rails are what let each screen slide forward independently, so servicing one panel does not require loosening the other three, and the small-degree swivel and tilt range exists mainly to align four screens into one flat plane rather than to aim the wall at a viewer.
Specifications
| Brand | J-Tech Digital |
|---|---|
| Model | JTECH-VMM-KIT22 |
| Brand Tech | J-Tech Digital |
| Color | Black |
| Connectivity | Crimp |
Frequently asked questions
How many screens does the J-Tech Digital 2x2 kit hold?
Four screens arranged in a two-by-two grid, each on its own VESA bracket.
Does the weight rating change based on the wall?
Yes, it is rated for 154 lbs per screen on concrete versus 110 lbs per screen on wood studs, with 616 lbs total across all four.
Can I reach the cables after the screens are mounted?
Yes, each bracket pops out on rails so ports and cabling stay reachable without removing the whole assembly.
Will this work on drywall alone?
The listing only rates the kit for concrete or wood stud walls, so drywall-only installation is not confirmed.
Can the screens be arranged in portrait mode?
Yes, the system supports both portrait and landscape orientations.