BetaFPV Meteor75 Pro Brushless FPV Drone
- Up to 6:30 flight time, LAVA II 1S 580mAh battery
- 1102 22000KV motors, 45mm 3-blade props
- 30.5g weight, 5.1 x 5.1 x 2.5 inches
- 5.8GHz 400mW VTX, 48 channels
- Integrated serial ELRS 2.4G receiver
- 2 batteries plus charger and voltage tester included
Updated 21 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A forgiving, durable whoop for FPV newcomers who want brushless power without soldering. A compatible ELRS radio and goggles are not in the package list, so budget for them.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FS6QHZ4BModel: Meteor75 ProCategory: Quadcopters & Multirotors
Overview
FPV beginners get a brushless whoop that needs no soldering, with a ducted frame, a tilted micro camera and a built-in video transmitter. The Matrix flight controller combines several boards in one, and motor plugs make swaps simple.
Durability and plug-in motors make it a practical first brushless whoop, and BETAFPV positions it for newcomers over its racier sibling. It flies only with an ELRS radio and FPV goggles, neither of which is listed in the box.
Who it's for
Suited to new pilots learning freestyle and racing in living rooms and parks. Pilots after top-end race agility may prefer a lighter, more aggressive frame.
Pros and cons
- No soldering needed
- Plug-in motors for easy swaps
- Durable, heat-resistant canopy
- Ultralight camera for indoor flying
- Radio transmitter not in the package
- FPV goggles not included
- Short flight time per pack
Performance notes
High-KV motors on small three-blade props give quick throttle response, while the larger battery stretches flight time compared with smaller packs. The ducted whoop frame protects props on bumps, which is why it survives crashes indoors.
Specifications
| Brand | BETAFPV |
|---|---|
| Model | Meteor75 Pro |
| Dimensions & fit | |
| Item weight | 30.5g |
| Item dimensions | 5.1 x 5.1 x 2.5 inches |
| Power & efficiency | |
| Battery Cell Composition | Lithium Polymer |
| Battery | LAVA II 1S 580mAh LiPo |
| Compatibility & installation | |
| Connectivity Technology | Integrated serial ELRS 2.4G |
| Included components | |
| Included Components | Quadcopter, 2 batteries, Type-C USB cable, BT2.0 charger and voltage tester, Type-C adapter, 4Pin adapter cable, 4 props, screwdriver, screws, canopy accessories |
| Other details | |
| Motors | 1102 22000KV |
| Propellers | Gemfan 45mm 3-blade, 1.5mm shaft |
| Flight time | Up to 6:30 |
| Flight controller | Matrix 1S Brushless 5IN1, G473 processor |
| Vtx | 5.8GHz, 48 channels, 400mW |
| Camera | C03 FPV camera, 30/20 degree tilt |
Frequently asked questions
Do I need to solder anything on the BETAFPV Meteor75 Pro?
No. The Matrix flight controller requires no welding, and motor plugs make installation easier.
Does the BETAFPV Meteor75 Pro come with a controller?
No radio is in the package list. It uses an integrated serial ELRS 2.4G receiver, so you need a compatible ELRS transmitter.
Is the Meteor75 Pro or the Air75 better for beginners?
BETAFPV recommends the Meteor75 Pro for newcomers, citing durability, no welding and a beginner-friendly experience; the Air75 targets advanced pilots.