SATA Ultra-Low Profile Steel Floor Jack 3 Ton
- Minimum Height: 2.1 inches
- Compatible with Vehicle Type: Car
- Automotive Fit Type: Universal Fit
- Item Weight: 70 pounds
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A 3-ton jack with a genuinely low-profile frame and a faster dual-piston pump, backed by an above-spec overload test from the manufacturer.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FVF7KT56Model: 3TSteelCategory: Floor Jacks
Overview
This SATA floor jack lifts up to 3 tons, 6,600 lb, using a dual-piston pump and a low-profile frame, aimed at home garages and shops working on lower-clearance vehicles.
The dual-piston pump is built to get the saddle rising faster with less handle effort than a single-piston jack of similar capacity, and SATA states every unit is load tested to 1.5 times its rating, 4.5 tons, before shipping. The listed lifting range runs from roughly 3-3/4 inches up to 19-1/8 inches, so the low-profile framing is about ground clearance for the empty jack sliding under a car, not the minimum saddle height.
- 3-ton, 6,600 lb, rated capacity
- Dual-piston quick-lift pump
- Listed lifting range roughly 3-3/4 in to 19-1/8 in
- Slow-release valve and overload protection valve
Who it's for
Suits anyone lifting sedans, SUVs or light trucks up to 6,600 lb who wants a jack that slides under lower cars and lifts with fewer pump strokes. Not built for loads beyond 3 tons.
Pros and cons
- Low-profile frame for sliding under lower vehicles
- Dual-piston pump reduces handle effort per the listed spec
- Slow-release lowering and overload protection
- Manufacturer states 1.5x overload testing at the factory
- Rated to 3 tons only, not for heavier vehicles
- Minimum saddle height should be checked against your car before buying
Performance notes
The dual-piston design uses a small, fast piston for the initial lift and a larger piston for heavier lifting, which is what lets a jack cut handle strokes without sacrificing capacity. A slow-release valve controls how the vehicle comes back down instead of dropping suddenly when the release is opened, and an overload valve is meant to stop the jack short of failure if the load exceeds 3 tons.
Specifications
| Brand | Sata |
|---|---|
| Model | 3TSteel |
| Dimensions & fit | |
| Minimum Height | 2.1 incheslower than 96% of 25 floor jacks |
| Item Weight | 70 pounds |
| Item Dimensions | 28.4 × 13.6 × 6.3 inches |
| Capacity & performance | |
| Load Capacity | 3 T |
| Construction & materials | |
| Color | Green |
| Compatibility & installation | |
| Compatible with Vehicle Type | Car |
| Included components | |
| Unit Count | 1 |
| Number of Packs | 1 |
| Included Components | USER MANUAL |
| Other details | |
| Automotive Fit Type | Universal Fit |
| Number of Items | 1 |
Closest rivals on specs
ARCAN A20003 Steel Low Profile Floor Jack 3 Ton- Minimum Height 2.1 vs 7.5 inches (-72%)
VEVOR Triple Bag Air Jack 5 Ton- Item Weight 70 vs 36 pounds (+94%)
- Minimum Height 2.1 vs 5.5 inches (-62%)
VEVOR AH081060 Ratcheting Farm Jack 60 Inch- Item Weight 70 vs 29.8 pounds (+135%)
- Minimum Height 2.1 vs 4.1 inches (-49%)
Frequently asked questions
What is the weight capacity of this SATA floor jack?
3 tons, or 6,600 lb.
Does it lower quickly when released?
No, it uses a slow-release system so the vehicle comes down gradually rather than dropping.
How low does the jack sit for sliding under a car?
SATA lists a low-profile frame with a lifting range from about 3-3/4 inches up to 19-1/8 inches, so check your vehicle's clearance before buying.