xTool F2 Ultra UV Laser Engraver 5W
- 5W UV laser source, 5000mW output, Class 4
- Spot size smaller than 10μm for fine detail
- 15,000 mm/s listed high speed
- Dual 48MP cameras for auto-focus and alignment
- Inner 3D glass engraving plus surface engraving, embossing and cutting
- Fully enclosed desktop body, aluminum alloy frame
- 49.6 pounds
- 12-Month Warranty
Last refreshed Sep 6, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A UV laser built for engraving inside glass and crystal and marking clear or heat-sensitive materials without charring. It is a high-power laser class, and the rotary and conveyor are not in the box.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0GFHVHXWJCategory: Engraving Machines & Tools
Overview
Glass gift makers and crystal trophy shops get a desktop UV laser that marks inside clear material as well as on its surface. A cold UV beam processes glass, acrylic, ceramics and plastic without burning the edges, and the software turns flat images into layered designs for engraving inside the glass.
Engraving inside glass and crystal is the reason to own it, and the cold light source leaves clean edges on materials prone to scorching. Rotary and conveyor are add-ons, and the laser class calls for careful handling despite the enclosure.
Who it's for
Gift sellers at craft fairs and shops doing personalized glassware get inner engraving and fast batch work in a compact enclosed body. Crafters cutting mostly wood or fabric will not use its UV glass strengths.
Pros and cons
- Engraves inside glass and crystal
- Clean edges without charring or yellowing
- Dual cameras for focus and alignment
- Software converts flat images to layered designs
- Rotary and conveyor not included
- Class 4 laser output despite enclosure
- Work area size not listed
- Heavy for a machine sold as portable
Performance notes
Detail is governed by the tiny UV spot, which concentrates energy into a very small point for sharp lines. The cold light source changes the material with little heat, so transparent and heat-sensitive items avoid burn marks without pre-coating. Camera-based focus and alignment cut setup error, and the high travel speed matters most on batch runs.
Specifications
| Brand | xTool |
|---|---|
| Dimensions & fit | |
| Item weight | 49.6 pounds |
| Spot size | Smaller than 10μm |
| Construction & materials | |
| Frame material | Aluminum alloy frame |
| Included components | |
| Included Components | xTool F2 Ultra machine, base material kit |
| Optional accessories | Conveyor, rotary (not included) |
| Warranty & support | |
| Warranty description | 1 year |
| Other details | |
| Laser class | Class 4 |
| Laser type | 5W UV laser |
| Cameras | Dual 48MP |
| Operation mode | Automatic |
Frequently asked questions
What do I need to set up the xTool F2 Ultra?
The box holds the machine and a base material kit. The listing describes a compact, fully enclosed desktop unit but does not detail ventilation, connection or software install steps, so check the xTool setup guide.
Does the xTool F2 Ultra include a rotary for tumblers?
No. It supports a rotary for 360° engraving on tumblers and a conveyor for batch work, but the listing names only the machine and base material kit as included.
Do I need to coat glass before engraving with the xTool F2 Ultra?
No. The listing says the cold light source gives clean finishes without pre-coating or polishing.
Is the xTool F2 Ultra safe to use at home?
It is fully enclosed for safe operation, but it is a high-power laser class. Follow xTool safety guidance and keep the enclosure closed during jobs.