Creality Falcon A1 Pro Laser Engraver Bundle 20W
- 20W blue laser plus 2W 1064nm IR module
- Up to 600 mm/s engraving speed
- 10mm basswood, 8mm black acrylic cut
- Enclosed body, covers filter 99% of light
- HD camera and 3 second autofocus
- 0.03mm IR spot for photos and jewelry
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
An enclosed, camera equipped engraver with autofocus and a second infrared head for metal and fine photo work. The listing calls the IR module both bundled and optional, and the work area is not given.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0GJZS3212Model: Falcon A1 ProCategory: Engraving Machines & Tools
Overview
A camera and a switchable pair of laser heads drive the Creality Falcon: a blue diode for cutting and an infrared module for fine work on metal. Autofocus lifts the head to height, and the enclosure, fan and lid stop handle smoke and light.
Camera positioning and autofocus remove most of the setup guesswork, and the infrared head reaches metals and fine photo detail the blue laser cannot. The listing is unclear on whether the IR module ships with this bundle, and leaves out the bed size and weight.
Who it's for
Small sellers and serious hobbyists who switch between cutting wood and marking metal will use both heads. Buyers who want a clear spec sheet should confirm the bundle contents and bed size first.
Pros and cons
- Two laser heads for wider materials
- Camera preview for placement
- Autofocus with Z-axis lift
- Enclosed with internal fan
- IR module described as optional and bundled
- Work area, weight and warranty not listed
Performance notes
The camera and AI vision handle positioning, so placement accuracy depends on calibration rather than eye. The blue diode governs cutting through wood and dark acrylic, while the infrared head handles fine detail on metal at a much smaller spot. Smoke is pulled through the enclosure by an internal fan.
Specifications
| Brand | Creality |
|---|---|
| Model | Falcon A1 Pro |
| Dimensions & fit | |
| Spot size | 0.03mm (IR module) |
| Capacity & performance | |
| Maximum speed | 600 mm/s |
| Power & efficiency | |
| Laser power | 20W blue, 2W IR (1064nm) |
| Construction & materials | |
| Material limits | 10mm basswood, 8mm black acrylic |
| Other details | |
| Autofocus | 3 seconds, Z-axis auto-lift, 0.012 in accuracy |
| Recommended Uses For Product | Photographs, jewelry, business cards |
| Safety features | Dual covers filter 99% of light, enclosed design, emergency stop, lid-open halt |
| Camera | HD camera, AI vision |
| Operation mode | Touchscreen, app |
| Ventilation | Internal fan |
Frequently asked questions
Is the 2W IR module included with the Falcon A1 Pro?
The title calls this a bundle with the 2W IR module, while one bullet calls it optional. Confirm with the seller before ordering.
Do I need goggles with the Creality Falcon A1 Pro?
The listing says the dual protective covers filter 99% of light, protecting your eyes without goggles.
How does autofocus work on the Falcon A1 Pro?
A camera module, AI vision, red dot ranging laser and Z-axis auto-lift set focus in about 3 seconds.