DLAB D2012 Plus High Speed Micro Centrifuges
- 500 to 15000 RPM, 100 rpm increments
- 15100×g max RCF, 100×g steps
- 12 tubes, 0.2 mL, 0.5 mL, 1.5 mL or 2 mL
- 11 s up, 9 s down acceleration and braking
- 30 sec to 99 min or continuous run time
- 54 dB or less noise, brushless DC motor
- 255 x 245 x 140 mm, 6 kg
Updated 2 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A compact benchtop microcentrifuge with a wide speed range and safety interlocks, for a lab that spins small tubes. The listing names CryoKing as the maker while the title reads DLAB.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0GWHFCQ6JCategory: Benchtop Centrifuges
Overview
A scientist spinning small tubes gets a brushless motor and a rotor that takes four tube sizes. An LCD shows speed or relative centrifugal force, and short-time run and sound alert functions are listed. Safety includes a door interlock and over-speed and over-temperature detection.
The reason to buy is the combination of high top speed, fine speed steps and several safety protections on a small footprint. The limit is naming: the brand field says CryoKing and the title says DLAB, and the listing gives no information on rotor type or warranty.
Who it's for
A lab handling microtubes will use the speed range and the quick acceleration. Users who need cooling or large-volume tubes should look at other centrifuges, since neither is listed.
Pros and cons
- Wide speed range
- Fine speed and RCF increments
- Door interlock and over-speed detection
- Low noise level
- Brand name differs from title
- Rotor type not listed
- No cooling listed
- Warranty not listed
Performance notes
A brushless DC motor drives the rotor up to the stated top speed, and speed can be switched with relative centrifugal force on the display. Quick acceleration and braking cut the wait before and after a run. Safety features lock the lid and stop the run if speed or temperature goes out of range.
Specifications
| Brand | CryoKing |
|---|---|
| Dimensions & fit | |
| Product Dimensions | 255 x 245 x 140 mm |
| Item Weight | 6 kg |
| Capacity & performance | |
| Speed Range | 500 to 15000 rpm, 100 rpm increments |
| Rotor Capacity | 0.2 mL, 0.5 mL, 1.5 mL, 2 mL × 12 |
| Speed accuracy | ±20 rpm |
| Noise | 54 dB or less |
| Power & efficiency | |
| Power | AC 100V to 240V, 50 or 60 Hz |
| Power | Single-phase, 3A, 100W |
| Other details | |
| Maximum RCF | 15100×g, 100×g increments |
| Acceleration and braking | 11 s up, 9 s down |
| Run time | 30 sec to 99 min, or continuous |
| Safety | Door interlock, over-speed, over-temperature, auto diagnosis |
Frequently asked questions
How do I install the DLAB D2012 Plus centrifuge?
No installation steps are listed. It is a benchtop unit with a 255 x 245 x 140 mm footprint and a weight of 6 kg, and it runs on AC 100V to 240V at 50 or 60 Hz.
Why does the listing say CryoKing and DLAB?
The brand field and manufacturer read CryoKing while the title uses DLAB D2012 Plus. Confirm the exact unit with the seller.
What tube sizes fit the DLAB D2012 Plus?
The rotor holds 12 tubes in 0.2 mL, 0.5 mL, 1.5 mL or 2 mL sizes.
Is this a refrigerated centrifuge?
No cooling is listed. It lists over-temperature detection only.