Perlesmith PSMF24B-US Full Motion TV Wall Mount
- 28 to 65 inch TVs, up to 88 lbs, VESA 100x100 to 400x400mm
- 16.28 inch extension with 45 degree swivel each way
- Tilts +5 up to -15 down, retracts flat to the wall
- Mounts to 12-16 inch stud spacing, brick, or solid concrete
- Built-in LED backlight syncs to music via remote, app, or switch
- Tested to 60,000 movement cycles and 4 times the rated load
- 3 height settings plus fine leveling after install
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
When a TV needs to swing out from a corner and swivel toward the seating, this full-motion mount with a synced LED backlight is built for it, as long as a stud or masonry backs the wall.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0GXFMZ2BYModel: PSMF24Category: TV Mounts
Overview
Dual steel arms bolt to a wood stud, brick, or concrete wall and let the TV swing out, swivel, and tilt to cut glare, while an LED strip behind the screen pulses in sync with music from a remote, app, or inline switch.
The full-motion arm is the reason to choose this over a fixed mount, since it swings the screen out and swivels enough to work from a corner or an off-center wall. The music-sync LED strip is a bonus most mounts do not offer. The tradeoff is a bulkier arm, and it still needs a stud or masonry wall.
Who it's for
Suits corner installations, seating that moves around the room, or anyone who wants synced LED lighting behind the screen. Anyone who only needs a flush tilt mount, or lacks a stud or masonry wall, should choose a simpler bracket.
Pros and cons
- Extends and swivels to reach off-center seating
- Tilt cuts glare from low or high seats
- Built-in music-sync LED backlight, app control
- Pre-assembled arms speed up installation
- Bulkier arm than a fixed or tilt-only mount
- Not rated for drywall-only walls
- LED brightness or lumen output not specified
- No stated compatibility with curved screens
Performance notes
The dual-arm design spreads the extend-and-swivel motion across two thicker steel arms rather than one, which is what lets it hold position at full extension instead of drooping. Anchoring is still up to the wall itself, since the plate needs a stud, brick, or solid concrete behind it, not the arm hardware.
Specifications
| Brand | Perlesmith |
|---|---|
| Model | PSMF24 |
| Dimensions & fit | |
| Minimumsupported Screen Size | 28 inches |
| Maximumsupported Screen Size | 65 inches |
| Construction & materials | |
| Color | Black |
| Enclosure Material | Alloy Steel |
| Compatibility & installation | |
| Mounting Type | Wall Mount |
| Compatible Devices | Television |
| Included components | |
| Unit Count | 1 |
| Warranty & support | |
| Warranty Description | 5 |
| Other details | |
| Movement Type | Articulating |
| Number Of Items | 1 |
| Maximum Tilt Angle | 15 degrees |
| Item Highlight | Fits 12"/16" Wood Studs, Max VESA 400x400mm, Swivel, Extension, Tilt, Backlit TV Mount With Music Sync, Up To 88 Lbs |
Frequently asked questions
Does the Perlesmith PSMF24B-US mount work on drywall?
No, the wall plate needs a wood stud, brick, or solid concrete behind it.
How far does the Perlesmith full motion mount extend?
The arm extends up to 16.28 inches from the wall and retracts to 2.9 inches.
Does the Perlesmith LED backlight sync to music on its own?
It syncs through a remote, a mobile app, or an inline switch, and not automatically without one of those.
What TV sizes fit the Perlesmith PSMF24B-US?
28 to 65 inch TVs up to 88 lbs with VESA patterns from 100x100 to 400x400mm.