
Renogy Pro Pure Sine Wave Inverter 2000W
- 2000 W continuous, 4000 W peak
- 12 V DC in, 120 V AC out, 60 Hz pure sine wave
- 92% efficiency, low idle power
- 2 outlets, including a GFCI AC outlet
- Bluetooth plus remote on a 16.4 ft cable
- 1/0 AWG 3 ft battery cable included
- 10.7 lb, 16.41 x 9.86 x 3.8 inches
- 2 year warranty from Renogy
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A pure sine wave inverter for an RV, truck or cabin battery bank, with Bluetooth and a wired remote for control. It accepts only the listed low voltage input and does not list a built-in charger.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0H4GQTTWKCategory: Solar & Wind Power Inverters
Overview
RVs, work trucks, boats and off-grid cabins with a battery bank are where the Renogy Pro inverter belongs, turning stored DC power into household AC with a pure sine wave. It connects with the included battery cable, mounts with self-tapping screws and can be switched from a wired remote or over Bluetooth.
Clean sine wave output and a low idle draw suit running sensitive electronics from a battery without wasting charge on standby. The included battery cable is short, so the inverter has to mount close to the bank. No charger or transfer switch is described, so shore or generator charging needs separate gear.
Who it's for
Suited to a camper, boat or cabin where a battery bank needs to feed laptops, tools and kitchen gear through standard outlets. Owners who want one box to both charge batteries and invert should look at an inverter charger instead.
Pros and cons
- Pure sine wave for sensitive electronics
- Low idle power draw
- Bluetooth plus wired remote control
- GFCI protected AC outlet
- Works only with the listed DC input voltage
- Short included battery cable limits placement
- Few outlets for direct plug-ins
- Built-in charger or transfer switch not listed
Performance notes
Continuous output is limited by battery capacity and cable size as much as by the inverter, since heavy loads pull high current from a low voltage bank. The surge rating covers motor and compressor starts for a moment only. Idle draw matters on long off-grid stays, where standby losses add up overnight.
Specifications
| Brand | Renogy |
|---|---|
| Dimensions & fit | |
| Item weight | 10.7 pounds |
| Item Dimensions L x W x H | 16.4 × 9.9 × 3.8 inches |
| Capacity & performance | |
| Output Power | 2000 watts |
| Peak Output Power Watts | 4000 watts |
| Inverter Capacity VoltAmp | 2000 VA |
| Output Voltage | 120 volts |
| Electrical Output Waveform | Pure sine wave |
| Power & efficiency | |
| Input Voltage | 12 volts |
| Power Source | Battery, Solar |
| Efficiency | 92% |
| Compatibility & installation | |
| Connectivity | Bluetooth |
| Warranty & support | |
| Warranty Description | 2 years |
| Other details | |
| Frequency | 60 Hz |
| Number of Outlets | 2 |
| Outlet protection | GFCI AC Outlet |
| Remote control | Wired, 16.4 ft cable |
| Terminals | 45 degree terminals |
Frequently asked questions
Does the Renogy Pro 2000W inverter charge batteries?
No charging function is listed. It is an inverter that turns 12 V DC into 120 V AC, so batteries need a separate solar charge controller or charger.
Will the Renogy Pro 2000W work on a higher voltage battery bank?
The listed input voltage is 12 V DC, and no other input voltage is stated.
What comes in the box with the Renogy Pro 2000W?
The inverter, a 1/0 AWG 3 ft battery cable, a remote control with a 16.4 ft cable, 4 self-tapping screws and an instruction manual.
Can the Renogy Pro 2000W run sensitive electronics?
It puts out a pure sine wave at 60 Hz, the waveform grid power uses, which suits electronics that do not tolerate modified sine output. The listing does not name specific devices.
Can I control the Renogy Pro 2000W from my phone?
The listing says it has Bluetooth, and a wired remote on a 16.4 ft cable is included. App name and features are not described.