Pyle Mid Bass Woofer 6.5 in
- 6.5 inch mid bass woofer
- 300 watts peak power, 4 ohm impedance
- 60 to 5000 Hz frequency response
- Aluminum voice coil, high-temperature design
- Butyl rubber surround, poly-injection cone
- 30 oz magnet, capacitor included
- Yellow plastic basket, dynamic driver
- 1 year warranty
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A single mid bass woofer for car component audio, with a stated peak power and a fixed impedance. Mounting depth and cutout details are not listed, and the listing gives no continuous power rating.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0H6KGL7YGModel: PLG64.5Category: Car Component Speakers
Sizes Available
Need a different one? Pick on Amazon →
Overview
A butyl rubber surround and a poly-injection cone move the air for this woofer, driven by an aluminum voice coil and a large magnet structure. The yellow plastic basket holds the parts, and a capacitor is built in for power support.
Choose it for a bold yellow woofer that adds low and mid bass to a component setup, with a high-temperature voice coil. The limits are a peak-only power figure, no continuous rating and no mounting depth for tight door panels.
Who it's for
A DIY installer who wants a mid bass driver with a distinctive yellow cone for a car door or deck. Skip it if the opening size and depth are unknown, or if a full-range speaker is needed.
Pros and cons
- Aluminum voice coil
- Butyl rubber surround
- Large magnet structure listed
- Frequency response range listed
- Peak power only, no continuous rating
- Mounting depth not listed
- Listed as a single unit, not a pair
Performance notes
Low and mid frequencies come from the cone moving on the rubber surround, with the aluminum voice coil carrying the driving current. The stated impedance must suit the amplifier or head unit, and the frequency range shows where the woofer stops being useful.
Specifications
| Brand | Pyle |
|---|---|
| Model | PLG64.5 |
| Dimensions & fit | |
| Speaker Size | 6.5 inches |
| Woofer Diameter | 6.5 inches |
| Dimensions (as listed) | 3.07 x 6.29 x 6.29 inches (D x W x H) |
| Capacity & performance | |
| Speaker Maximum Output Power | 300 watts (peak) |
| Construction & materials | |
| Color | Yellow |
| Enclosure Material | Plastic |
| Compatibility & installation | |
| Mounting Type | Car Mount |
| Connectivity Technology | Wired |
| Warranty & support | |
| Warranty Description | 1 Year Warranty |
| Other details | |
| Impedance | 4 ohm |
| Speaker Type | Woofer |
| Audio Driver Type | Dynamic Driver |
| Voice coil | Aluminum |
| Surround | Butyl rubber |
| Magnet | 30 oz structure |
| Frequency Response | 60-5000Hz |
| Model number | PLG64.5 |
Closest rivals on specs
RECOIL REM65 Echo Series Component Speakers 6.5 in- Speaker Maximum Output Power 300 vs 200 watts (+50%)
Hertz Uno K-165 Component Speakers 6.5 in- Speaker Maximum Output Power 300 vs 150 watts (+100%)
Focal 165 AS Access Component Speakers 6.5 in- Speaker Maximum Output Power 300 vs 120 watts (+150%)
Frequently asked questions
How deep is the Pyle PLG64.5 woofer?
The item dimensions are 3.07 x 6.29 x 6.29 inches (D x W x H). The listing gives no mounting depth or cutout size, so check it against the factory opening.
Does the Pyle woofer include a tweeter or crossover?
No. It is described as a mid bass woofer, and no tweeter or crossover is listed.