Eastwood Elite MP140i Multi-Process Welder
- MIG, DC TIG and stick in one machine
- 120V AC input, 50/60Hz single phase
- 30A to 140A MIG output
- 15A to 110A TIG output, high frequency start
- 20A to 75A stick output
- 0.023 to 0.030 inch wire, 80 to 320 in/min feed
- 33.73 lb welder, item weight listed as 60.6 lb
- CSA certified
Updated 21 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A strong all in one choice for restorers and home fabricators who want high frequency TIG alongside MIG from a household outlet. The listing gives no duty cycle, and pedal control and aluminum need optional accessories.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0H71TPV6JModel: 73885Category: MIG Welding Equipment
Overview
Independent gas solenoids let the Eastwood Elite swap quickly between MIG and TIG, while a synergic LCD interface guides setup. High frequency start lights the TIG arc without touching the work, and Smart Wire Feed smooths MIG starts.
Three processes on ordinary wall power is the case for it, saving bench space in a small garage. Optional add ons extend it further: a foot pedal for amperage control and a spool gun for aluminum MIG.
Who it's for
Home garages, restoration projects and mobile repair jobs suit the compact multi-process format. Anyone needing AC output for TIG on aluminum, or wire larger than the rated range, will be limited.
Pros and cons
- Three processes in one compact unit
- Non-contact high frequency TIG start
- Synergic LCD simplifies setup
- Plugs into ordinary household power
- DC only, no AC TIG
- Foot pedal and spool gun optional extras
- Duty cycle not listed
- Narrow wire diameter range
Performance notes
Output on household power is governed by the single phase input, which caps how much heat reaches thick joints. High frequency start avoids tungsten contamination at arc strike, and Smart Wire Feed controls the run-in that decides how clean MIG starts look. On stick, arc force raises current when the rod gets close to the puddle, reducing sticking.
Specifications
| Brand | Eastwood |
|---|---|
| Model | 73885 |
| Dimensions & fit | |
| Item weight | 33.73 pounds |
| Dimensions | 19.1 × 9.2 × 16.5 inches |
| Power & efficiency | |
| Power Source | Corded electric |
| Input voltage | 120 volts |
| Construction & materials | |
| Color | Black |
| Compatibility & installation | |
| Interface | Synergic LCD |
| Included components | |
| Included Components | Eastwood Elite MP140i Welder |
| Optional accessories | TIG foot pedal, spool gun |
| Other details | |
| Welding processes | MIG, DC TIG (high frequency start), stick |
| Certification | CSA |
Frequently asked questions
How big is the Eastwood MP140i?
The description lists 19.06 x 9.25 x 16.54 inches. Plan bench or cart space for that footprint plus a gas cylinder.
Can the Eastwood MP140i weld aluminum?
With the optional spool gun it can MIG weld aluminum. The TIG side is DC only, so it is not set up for AC aluminum TIG.
Does the Eastwood MP140i include a TIG foot pedal?
No. The only included component listed is the welder itself, and the pedal is an optional add on for amperage control.
Is the Eastwood Elite MP140i easy for beginners?
The description says its guided LCD setup helps beginners and experienced welders alike get results quickly.