ELEGOO PETG Filament 1.75mm 2 Pack
- 2 spools in the pack
- 1.75 mm, +/- 0.02 mm accuracy
- 230 - 260 C print, 65 - 75 C bed
- Under 250 mm/s print speed
- 37 MPa tensile strength
- 1.27 g/cm3 density
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A two pack of black PETG with full printing parameters and strength data, good for durable functional parts. Spool weight per roll is not stated outside the title.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0H92G5KRTCategory: 3D Printing Filament
Overview
Not a hobby only PLA, ELEGOO PETG is a tougher filament with published temperatures and strength figures for functional prints. It resists water and heat well enough for indoor and most outdoor parts.
Published settings and mechanical data take the guesswork out of starting with PETG. Once opened it should be used soon or dried again, since PETG picks up moisture.
Who it's for
Owners of Neptune, Ender, Adventurer and Kobra printers making brackets and holders will get dependable results. Those needing flex should use TPU.
Pros and cons
- Full printing parameters given
- Strength data published
- Tight diameter accuracy
- Wide printer compatibility
- Needs drying after opening
- Per spool weight unclear
- Hotter bed than PLA
Performance notes
Part strength depends on layer adhesion, which improves within the listed nozzle and bed temperature ranges. PETG's toughness lets parts flex slightly before breaking. Moisture weakens layers, so dry storage matters after opening.
Specifications
| Brand | ELEGOO |
|---|---|
| Dimensions & fit | |
| Item Diameter | 1.75 millimeters, +/- 0.02 mm |
| Item weight | 2.24 kg |
| Capacity & performance | |
| Max print speed | Under 250 mm/s |
| Bed temperature | 65 - 75 C |
| Print temperature | 230 - 260 C |
| Construction & materials | |
| Material Type | PETG |
| Color | Black |
| Included components | |
| Number Of Packs | 2 |
| Other details | |
| Density | 1.27 g/cm3 |
| Tensile strength | 37 MPa |
| Elongation at break | 6.9% |
| Bending strength | 65 MPa |
| Izod impact strength | 55 kJ/m2 |
Frequently asked questions
What comes in the ELEGOO PETG pack?
Two spools of black 1.75 mm PETG. The listing weight for the pack is 2.24 kg.
Is ELEGOO PETG the same as PLA?
No. It is PETG, which is tougher and more heat and water resistant, and prints hotter.
What temperatures should I use for ELEGOO PETG?
230 - 260 C for the nozzle and 65 - 75 C for the bed, at under 250 mm/s.